资源列表
stepmotor
- 带有S型曲线加减速的步进电机驱动程序，基于hal库，用stm32 cube mx生成工程。(With the S-curve acceleration and deceleration stepper motor driver, based on hal library, with stm32 cube mx generation project.)
TCD1304
- 利用STM32的定时器产生驱动TCD1304的时序，不占用cpu时间，亲测可用。(The use of STM32 timer to generate the timing of the driver TCD1304, does not take up CPU time, pro test available.)
MODBUS-51工程版主机
- modbus STC 51 主机 工程代码(modbus master C51 STC89C52)
soc
- 安时积分发计算SOC，精确到半分比1%，输入电池容量即可(Calculate SOC on time Only approximate capacity can be calculated)
STM32 PID电机闭环控制参考代码
- stm32 BLDC闭环PID控制，非常好的资料(Stm32 BLDC closed loop PID control)
storm32三轴手持增稳云台项目实现代码
- storm32 bgc手持云台增稳的代码，初次实验，自己写的希望多多交流(storm32 bgc Hold the cloud platform to stabilize.)
Bosch MEMS Accelerometers
- 博世Bosch SMA660高加速度（120g~480g）双轴MEMS 传感器数据手册：汽车气囊系统、高加速度/冲击检测等应用。未公开的资料。(Bosch SMA66x/68x/69x Series MEMS Acceleration Sensor Technical Documentation. Non-disclosed version.)
matlab_simulink 蓄电池仿真模型
- MATLAB sumulink 蓄电池仿真模型(MATLAB sumulink Battery simulation model)
PIC32MM.X
- 实现SX1280的收发程序，模式可以自行设定，FLRC实测速率可以达到1Mbps(Achieve the SX1280 transceiver program, the mode can be set by itself, the measured speed of FLRC can reach 1Mbps)
AT90CAN64+BMS-3000w
- AT90CAN64单片机程序，BMS国标2015CAN通讯，3000w充电桩程序(AT90CAN64 MCU program, BMS national standard 2015CAN communication, 3000W charging pile program)
功放程序
- 使用STC89C52单片机实现对PGA2311和CD4052的控制，进而实现对功放音量的控制。(The control of PGA2311 and CD4052 is realized by using STC89C52 single chip computer, and then the volume of power amplifier is controlled.)
ili9340 proteus + Keil
- Proteus里面仿真ili9341(for proteus)