资源列表
Timer
- 1.设定系统工作在xxMHZ bus clock时钟下 2.测试龙丘最小系统开发板超频性能: 如果LED闪烁，说明芯片正常工作 否则，说明芯片没有正常工作，请检查系统设计 3.也可以测试清华大学最小系统板的超频性能, LED计数，根据灯亮可以读取系统循环了多少次 -this is for the peole who want to know how the timer of MCU work.
speedcontrol
- 利用单片机控制速度，调节速度大小，希望能给广大单片机学习者带来帮助！-Control speed by MCU,I hope it can work for who study for MCU.
freescalechengxu
- 完整的飞思卡尔智能车程序，做智能车的朋友可以借鉴着看。-a complete of freescale ,the friend who are working to freescale may learn for it.
s3c2440timer
- 学习ARM9必须要先懂的基本接口实验，定时器中断程序-s3c2440 timer you have to know the basic knowledge
usb_host_disign
- 嵌入式上的usb host开发参考，这方面资料不是很多，可以参考下-Embedded usb host on the development of reference, this information is not a lot, you can refer to the following
s3c2440init
- arm9 s3c2440最详细的启动文件分析，理解了这个文件，就算是ARM入门了-the init.s is the file of s3c2440 inition file, if you want to learn arm,it is the first file you should read.
s3c2440PWM
- 这是s3c2440脉宽调制裸机应用，是熟悉ARM9硬件的最基本的程序。-this is the s3c2440 PWM ,the basic program you have to know ,and you should read it.
s3c2440UART
- 这是S3C2440串口驱动的设计，是裸机的，对了解ARM9硬件有很好的帮助。-this is the s3c2440 UART application, through the program you can get the knowledge of hardware of ARM9
s3c2440LCD
- 这是S3C2440看门狗的具体应用，裸机程序，帮助你理解硬件。-this is the WATCHDOG of S3C2440,which can help understand the hardware of ARM9.
Ne2000
- 44B0网口程序，该程序时关于RTL8019的-44B0的网卡驱动程序
C51_SH79F162_Timer
- 单片机SH79F162的基础驱动程序源代码timer-SCM SH79F162 based driver source code timer
pwm
- 中颖系列SH单片机编程范例（ＰＷＭ的控制）-Microcontroller programming paradigm in Ying (PWM control)