资源列表
mp3player
- ARM7应用中关于MP3播放器的运行代码，代码例子运行环境为EMBEDDED VISUAL C++ -ARM7 applications to run on the MP3 player code, the code example operating environment for the EMBEDDED VISUAL C++
SetDisplay
- ARM7 wince系统下对液晶或显示器的分辨率配置程序，该程序可设置分辨率以及正反时钟同步模式。-ARM7 wince system for the resolution of the LCD or monitor configuration program, the program can set resolution, and positive and negative clock synchronization mode.
splc501-code
- SPLC501液晶模组的驱动配置程序，该程序基于51单片机实现。-SPLC501 LCD module driver configuration program, the program 51 based MCU.
CAN
- 关于LPC1700 CAN通讯的上好源码-Superbly on the LPC1700 CAN communication source
Ethernet
- 关于LPC1700 CAN通讯的上好源码-Superbly on the LPC1700 CAN communication source
onewire.tar
- OneWire library. Driver is completely independent on the hardware, allow multiple OneWire channels and is easily extensible for other devices.
ccc2430_control_CAN
- cc2430控制mcp2515的源代码，是本人精心所写，希望对你们有用。-cc2430 control mcp2515 source code is carefully written, I hope you find useful
time-show
- 利用msp430f149 定时器进行计时，在四位数码管上显示-I use msp430f149 timer_b modular to accout time,and then show it through four led
LED
- 1设计要求 PC6,PC7,PD6,PD13 LED快速交替闪烁。 2 硬件电路设计 在开发板上通用I/O口PC6,PC7,PD6,PD13作为控制D1,D2,D3,D4的控制线。 3软件程序设计 根据设计任务要求，软件程序主要包括： (1) 配置GPIO口，将PC6,PC7,PD6,PD13配置为上拉输出模式。 (2) 延时控制相应端口的置位和复位。 4 运行过程 (1) 使用Keil uVision3 通过
TFTPSD
- 2.4寸TFT液晶屏，带SD卡读写，ATMEGA128控制器，编译器为IAR for AVR-2.4-inch TFT LCD with SD Card Reader, ATMEGA128 controller, the compiler is IAR for AVR
STM32-MCU-Quick-StartV1[1].0
- STM32 快速入门，对初学者有参考价值。-STM32 Quick Start, a reference value for beginners.