资源列表
set_alarm
- 主要讲了在ARM中怎么设置时钟！并用具体的C语言代码做了说明-ARM set alarm
uart
- 一个基于UART的数据队列程序， 硬件平台： TI LM3S-UART-based data of a cohort program
GPIO_adc_dac_dma
- STM32 ADC/DAC/DMA设置，开发环境IAR5.4-STM32 ADC/DAC/DMA settings, the development environment IAR5.4
ARM7_test5
- 在Keil软件中编写外部中断EXTIN0的中断程序，并对中断进行计数，然后将计数值以二进制形式从D5、D6输出。-Write in the Keil Software interrupt External Interrupt EXTIN0 procedures, and interrupt the count, then count in binary form from the D5, D6 output.
jqrenduoji
- 机器人中用到的舵机控制全套资料，硬件图纸软件全包括-Robot servo control used in a full set of data, including all software, hardware drawings
sounic_INT
- 超音波對空雷達: 使用SRF05超音波範圍檢測器與2自由舵機，可對空曠區域進行平面掃瞄、掃瞄到有物體進入則持續追蹤。物體消失則進行最後消失區域擴大掃瞄。有效距離為2cm-60cm。開發環境： arduino-Ultrasound-to-air radar: Use SRF05 ultrasonic range detector and 2 free steering gear, the plane can be scanned on the open area, there are object
ick_test
- 该代码是西门子公司sle4442的固件代码，mcu使用的是c8052f340，代码结构清晰，注释明确，是学习该芯片的良好资料-Siemens sle4442 the code is the firmware code, mcu using c8052f340, the code structure is clear, comments clear, is to learn good information on the chip
WinceWorksForARM
- ARM程序设计，全部都有，欢迎下载，共同讨论-ARM programming, all are welcome to download, to discuss
DAC_teste.tar
- This package contain a sample code of D-A usage. This exemple show how to initialise e use this device of the LPC2378 - ARM7.
Common
- 基于NXP公司LPC2478芯片的comon使用例程，需要的朋友下载-NXP LPC2478 chip company based comon use of routine, you need a friend to download
KheEcX0U
- MB86R01富士通开发的基于ARM926微处理器的汽车图像处理系统，-Developed by Fujitsu MB86R01 ARM926 microprocessor-based vehicle image processing system