资源列表
STM32F103uart
- STM32F103的串口通讯例程 This example provides a descr iption of how to use the USART with hardware flow control and communicate with the Hyperterminal. First, the USART2 sends the TxBuffer to the hyperterminal and still waiting for a string from the
C
- 步进电机控制程序，stm32f103系列-Stepper motor control procedures, stm32f103 series
12_1_flash_spi
- 12_1_flash_spi 1788 flash SPI
4_1_can
- 4_1_can NXP LPC1788 -4_1_can NXP LPC1788
9_1_usb_HID
- 9_1_usb_HID NXP LPC17-9_1_usb_HID NXP LPC1788
demo52259Ethernet
- 飞思卡尔mcf52259以太网源码 MQX系统，codewarrior7.1版本-Freescale MQX source mcf52259 Ethernet system, codewarrior7.1 version
35905711AT24XX_Driver_for2402_2404_2408_2416
- I2C interface Memory 24C04
SD
- 基于STM32的SD卡(SDIO模式)测试实验，并将测试信息通过串口1在电脑的超级终端上打印出来-Based on the STM32 SD card (SDIO mode) testing laboratory and a test message via the serial port on the computer print out HyperTerminal
mp3
- MP3文件测试，支持中英文、短文件名和长文件名。测试信息显示在串口上而不是液晶上.-MP3 file testing, support in English, short file names and long file names. Test information is displayed on the serial port instead of the LCD.
USB
- 这是一个USB实验，用USB线连接PC机与开发板，在电脑上就可以像操作普通U盘那样来操作开发板中的SD卡-This is a USB experiment with a USB cable to connect the PC to the development board, the computer can operate as common U disk to operate as an SD card development board
SysTick
- This example shows how to configure the SysTick to generate a time base equal to 1 ms. The system clock is set to 168 MHz, the SysTick is clocked by the AHB clockHCLK. A "Delay" function is implemented based on the SysTick end-of-count event.
ADC3_DMA
- This example describes how to use the ADC3 and DMA to transfer continuously converted data from ADC3 to memory. The ADC3 is configured to convert continuously channel7. Each time an end of conversion occurs the DMA transfers, in circular mode,