资源列表
Pid-fuzzy-c-language-
- 单片机C语言开发，模糊FUZZY-PID的详细C语言编程程序-Pid fuzzy microcontroller c language program
traffic
- 交通灯点亮及计时程序，主频为50M赫兹，计时频率为1秒-Traffic lights and timing procedures, clocked at 50M Hz clock frequency of 1 second
lis3dh_driver
- 意法半导体 LIS3DH 的驱动，最新的LIS3DH 三轴加速度计的驱动源码-STMicroelectronics LIS3DH drive triaxial accelerometer latest driver source code
key_exti_1
- 这个程序是我学习STM32是写的一个蜂鸣器驱动程序，对新手还是有点参考价值的。-This program is my learning STM32 is write a buzzer driver, for novice or a little reference value.
demo
- 这是我自己给自己写的一个STM32工程模板，方便写程序，免得每次都得添加库文件什么的。-This is what I wrote for ourselves a STM32 project templates, easy to write programs, so each had to add the library file or something.
STM32
- 这是一个STM32学习的小工具，可以根据你的配置生成相应的库函数代码。方便实用。-This gadget is a STM32 learning library functions can generate the corresponding code according to your configuration. Convenient and practical.
ProcessorExpert
- ultrasonic sensor using KL25Z fresssacle and code worrior -ultrasonic sensor KL25Z
TP0-Etape1
- chnge state of led card stm32f4 with keil uvision
8259.asm
- 直接用手动产生单脉冲作为中断请求信号。 要求每按一次开关产生一次中断,在屏幕上 显示一次“TPCA Interrupt!”,中断10次后 程序退出-Directly by hand to produce a single pulse as an interrupt request signal. Each time you press the switch requires an interrupt is generated, show a TPCA Interrupt! On the sc
BIN-Load-System
- 这是一个针对战舰开发板SRAM调试的方案，直接用串口将BIN文件烧写到SRAM并运行(其它板可能不适用此法)-This is a SRAM development board for debugging scheme of warship, the BIN file directly to a burning SRAM and run with the serial port (other board may not apply this method)
LPC1788_VGA_COLOR
- 鼎lpc1788尚开发板的vga的显示，1024x768-lpc1788board,lcd to vga display,1024x768
daolibai
- 使用arm7的stm32f103实现的倒立摆的题目，其中有电机驱动，显示等-Using arm7 stm32f103 to achieve the title of the inverted pendulum, including motor driver, display, etc