资源列表
lpc214x_ucosii_280_Keil
- keil环境下基于lpc214x(arm7)的uCOS操作系统移植范例-keil Based on lpc214x (arm7) example of the operating system migration uCOS
UART2
- 单片机扩展多个串口的另外一个例子，可实现更少的端口占用，以及中断方式和查询方式。源代码，可直接使用-Single-chip serial port expansion more than another example of the realization of fewer ports may be occupied, as well as the interruption of the way and manner inquiry. Source code, can be directly u
ADC
- INFINEON公司弹片机产品XC164源码下载,ADC初始化处理以及ADC数据读入示例程序.-INFINEON Company Product XC164 shrapnel source download, ADC initialization processing, and ADC data read into the sample application.
BOOT
- SST单片机实现sip在系统调试和仿真的时候，需要一个从下载过程和仿真过程两个部分切换的BOOTLODER，就是这个东西，官网不提供下载哦（要花钱的）！-SST Singlechip sip debug and simulation in the system, the need for a download process and simulation from the two parts of the process of switching BOOTLODER, is this thing
CAN
- INFINEON公司弹片机XC164源码示例,CAN总线通讯初始化和应用代码示例.-INFINEON Company shrapnel source machine XC164 example, CAN bus communication initialization and application code examples.
5_UART_SST_4(good)
- 单片机一次性扩展5个串口，没有使用限制，最高可达12000速率，够牛的吧？整套源代码，包括main.C以及各个.H头文件，可直接使用甚至无需编译。-Single-chip one-time extension of five serial port, there is no restriction on the use of up to 12,000 rate, enough cattle, right? Package of source code, including the main.c
ds1302
- 读DS1302时钟芯片数据，以十进制返回-Time clock chip DS1302 data to decimal return
Sample_Code_C1
- 该源码通过IO口对sht1x系列温度传感器系列进行了控制, 用户只要根据自己的硬件对IO口进行设置即可使用,使用时注意IO口的输入输出和内部上拉控制即可使用.-The source through the IO port sht1x series of temperature sensors series of control, the user as long as the hardware according to their own set of IO port to use, the u
MAIN000
- 支票打印机的汇编源码,CPU是8051,还有串行通讯-Check the printer s source code compilation, CPU is the 8051, there are serial communication
LM75A
- 基于Freescale Codewarrior6.2环境下的针对qe8 单片机的LM75A温度传感器的驱动程序,可以直接使用-Based on Freescale Codewarrior6.2 environment for qe8 SCM LM75A temperature sensor drivers, can be directly used
yibuyibuyizhi-ucosii
- 一步 移植ucosii for c51,ucosii for 51多任务实时操作系统-Step transplantation ucosii for c51, ucosii for 51 multi-task real-time operating system
11111
- 功能要求: (1) start为”1”时，步进电机转动。 start为”0”时，步进电机停转。 (2) 预设step_in为常数，当clk为上升沿，load和start为”1’加载时，电机开始转动，转动step_in次后，停止转动。当下次符合此要求时将再次转动。 (3) 通过load,，step_in同步或异步载入steps值。 -Functional requirements: (1) start to 1 , the stepper motor rotation. s