资源列表
SCI0702
- DSP28335的SCI串口程序，采用SCI的C模块，接收采用中断方式，可以接收不同长度的数据并实时处理-DSP28335 of SCI serial procedures, using the SCI C module receives interrupt mode, you can receive different lengths and real-time processing of data
EXINT
- DSPf2407A外部中断程序，可通过设定不同的按键进入中断-DSPf2407A external interrupt program, by setting different keys to enter the break
RAMTest
- DSPf2407A的RAM读写程序，可以判定芯片的RAM是否读写正常-DSPf2407A of RAM literacy program, it can be determined whether the chip RAM read and write properly
Timer1
- DSPf2407A的定时器1程序，通过定时器控制LED灯的闪烁-DSPf2407A a program timer, flashing LED lights controlled by timers
AD
- C5509 模数转换程序源代码（程序例程）手把手教你学DSP光盘内容-C5509 digital conversion program source code
FFT
- C5509 快速傅里叶变换FFT程序源代码（程序例程）手把手教你学DSP光盘内容-C5509 fast Fourier transform (FFT) program source code (routine) taught you learn DSP CD content
FIR
- C5509 FFT算法的DSP实现程序源代码（程序例程）手把手教你学DSP光盘内容-DSP C5509 FFT algorithm realization source code (routine) taught you learn DSP CD content
GPIO
- C5509 GPIO引脚程序源代码（程序例程）手把手教你学DSP光盘内容-C5509 GPIO pin source code (routine) taught you learn DSP CD content
Timer
- C5509 定时器程序源代码（程序例程）手把手教你学DSP光盘内容-C5509 timer program source code (routine) taught you learn DSP CD content
msp430x47x4_sd16_01
- 本程序代码使用SD16模块在四组通路上执行连续的转换，每当转换完成后SD16中断就会发生。-This program uses the SD16 module to perform continuous conversions on a group of channels (0, 1,2 and 3). A SD16 interrupt occurs whenever the conversions have completed. Test by applying voltages
msp430x47xx_flashwrite_01
- 本程序代码首先擦除Flash段C，然后把C段中的数值增加，然后擦除段D,再然后把段C中的内容拷贝到段D。-This program first erases flash seg C, then it increments all values in seg C, then it erases seg D, then copies seg C to seg D.
msp430x47xx_uscib0_i2c_02
- 本程序代码是使用I2C通信的一个例子，主要实现I2C与在读写模式下的PCF8574通信。-I2C communication with a PCF8574 in read and write mode is demonstrated. PCF8574 port P is configured with P0-P3 input, P4-P7. Read P0-P3 input data is written back to Port P4-P7. This example uses t