资源列表
timer
- 这个工程是mini2440的时钟控制模块，测试已通过-The project is the the mini2440 clock control module, the test has passed
STEP-MOTOR-IR
- 1、LCD1602 显示红外遥控器键值编码。 2、使用红外遥控器对步进电机的转动方向和速度进行控制。 定义5个有效按键： UP 键按下步进电机正转，显示 >>>> 。 DOWM 键按下步进电机反转，显示 <<<< 。 K1 键按下步进电机停止转动，显示 STOP 。 ＋ 键减少延时时间，步进电机加速。 － 键增加延时时间，步进电机减速。-1, LCD1602 disp
LED
- 此程序实现了用89c52单片机编程，控制一块240*218点阵的液晶屏，并在其上显示文字。-Program the with 89c52 microcontroller programming, control a 240* 218 dot matrix LCD screen, and display text on.
51_SystemBoard
- 12864液晶显示驱动源程序主程序示例程序等等51开发示例程序-12864 LCD driver source code main program sample program
20121231_688_Recv_ISR
- PIC16F688解码程序。在中断内部解码，定时100US。编码方式，3个字节地址，1个字节功能码，1个字节校验码……经测试，成功通过。-PIC16F688 decoding procedures. Interrupt internal decoding timing 100US. Encoding 3-byte address, 1 byte function code, 1 byte checksum ... has been tested successfully.
d1302clock
- D1302+数码管显示带秒时钟 用杜邦线将D1303芯片于单片机的I/O口相连,具体如下: RST----P1.0 I/O----P1.1 CLK----P1.2-The D1302+ digital display with seconds clock the D1303 chip connected to the microcontroller' s I/O port with DuPont line, as follows: RST----, P1.0 I/O-
c51-source-code
- 单片机W7732 GPRS 数据传输源代码,采用keil IDE 开发,主要实现串口到GPRS，及GPRS数据到串口的转换-MCU W7732 GPRS data transfer source code, keil IDE development, the main serial port to GPRS and GPRS data to serial converter
HI-TECH_for_HOLTEK_C
- HI-TECH_for_HOLTEK_C开发环境。-The development environment HI-TECH_for_HOLTEK_C.
Nokia3310H_V1.0
- Nokia Display 3310 Code in C
CAKRA3.5
- 汽车转向灯的51单片机编程，用汇编语言编写-Car turn signal 51 microcontroller programming, written in assembly language
msp430x24x_uscia0_irda_01
- MSP420F249的串口程序，很不错的，已经试验过能成功运行。-MSP420F249 serial procedures, very good, and has been tested successfully run.
ex86
- 将按键次数写入AT24C02，再读出并用1602LCD显示-AT24C02, write the number of keystrokes to read out 1602LCD