资源列表
SD
- STM32 SD卡功能 比如读文件，写文件，中文目录 FATFS移植-STM32 SD card functions such as read files, write files, the Chinese directory FATFS transplant
wenduchuanganqi
- 实现温度测量并在数码管上显示，并且精度很高，达到小数点后面两位-To realize temperature measurement and digital tube display
51_MCU_code
- 这个是51单片机开发板相配套的源码程序，包括AD转换、液晶显示、按键扫描等，可以直接运行。-This is a 51 MCU development board supporting source programs, including the AD converter, LCD, key scan, etc., it can be run directly.
key
- 51单片机的4*4矩阵键盘驱动，返回键码值-51 MCU 4* 4 matrix keyboard driver to return the key code value
DA_8591
- 基于LM3S811的PCF8591的程序，PCF8591是采用I2C通信的ADC。-A LM3S811 the PCF8591 program, PCF8591 I2C communication ADC.
MSP340f149_LCD12864
- MSP430F149驱动彩屏12864的程序，使用无误，功能完善。希望指正学习。-The MSP430F149 driver 12864 color display program, using the correct, fully functional. Hope corrections learn.
Keytest
- 测试矩阵键盘，并用数码管静态显示出来。当按下第一行第一列的键时，显示出“0”，依次类推分别显示出0~9，A~F. 调试通过。-Test matrix keyboard,and display the key number through the LED. Display 0~9,A-F, when the corresponding key is pressed.
Showtime
- 实现时间显示功能，以例如"09-14-36"的格式显示时间，分别为时分秒。将要显示的时间数值存放在Buf2命名的数组当中，主函数中直接调用Buf2数组名即显示所要的时间。-The function is showing time. Displaying the time in the form of "09-14-36", the number are hour minute and second. Place the three number in the Buf2, and then use
ADuc7060PM25P64
- ADuC7060使用M25P64 外部SPI FLASH芯片-ADuC7060 use the M25P64 external SPI FLASH chip
485toIO
- 从串口接收车检器接收机数据，并转换成电平信号-Level signal and convert the device-under-test (DUT) receiver data from the serial port to receive car
RS232
- 串口通讯发送接收实验。在电脑上用串口调试工具发送一个数字给单片机，单片机接收这个数字后，将这个数字加上0x10，然后发送给串口调试工具，并在窗口中显示出来，接着再发送一串字符串给电脑，也在窗口中显示出来。-Serial Communication test for sending and receiving data. Using the serial communication tool to send a number to the 51 MCU, after 51MCU received
AD
- 关于芯片ADC0804的模数转换实验。首先启动芯片ADC0804开始模数转换，接着单片机在接收到串口调试工具发送的一个数字之后，单片机将转换后的数字信号的值读出来，并返回发送给串口调试工具，并在其窗口中显示出来。-IC ADC0804 test for AD signal convert. Start the IC AD and make it work. After 51MCU received one number from the serial communication tool, th