资源列表
scyijing3
- 氢氧切割机触发板设计基于STC 可以控制电机，-STC JDSIFJIJFCKSDJFIJWRISDOJCKSJDKL HFIW HFIASJ FKASJF F SDJFI F SADFJ ISFJSD DFJIO DJFJIOWJFIO DFJIDO DFHI FIDJF D IDFJIAOJ DF IDFJF IDJFIJI DFH DHF DJSFHWUI DJFH IEAWIOEUKN IFIOEHJGIOFHSD DH UIDFHWEUIFHI
sd-card-writting-from-Atmel168
- Ready to use code for atmel
SD-main-c
- 这个程序是SD卡底层板卡的主程序,所用语音是C语音-SD card main process
sd-test
- ARM SD卡测试程序，可以用于编写ARM的SD接口驱动-ARM SD card test program, can be used for the preparation of the SD interface driver ARM
sd16
- MSP430单片机系列的F2470的16位AD采集程序，另加段式液晶显示。经调试，稳定精确，用来测试电压。-F2470 MSP430 MCU series of 16-bit AD collection procedures, plus Segment LCD. After debugging, stable and accurate, to test the voltage.
sd2068_avr
- sd2068应用，包括头文件、引脚说明，及其控制等方面-sd2068 applications, including header files, pin descr iptions, and control, etc.
sd2200c_eeDE_C
- 实时时钟SD2200读写C51演示程序实时时钟SD2200读写C51演示程序-SD2200 read and write real-time clock Real-Time Clock C51 Demo C51 demo program to read and write SD2200
sdcard
- This is module SDcard_interface with use SPI_interface
sdCARDOPER
- sd卡底层的操作子程序，包括硬件SPI实现的读写子程序以及软件模拟SPI的读写子程序-sd card underlying the operation of subroutines, including hardware SPI realize the read and write subroutines, and software simulation of the read and write SPI subroutine
sdi
- 基于ARM s3c2440 SD卡的驱动源代码。-Based on ARM s3c2440 SD card driver source code.
SDIO
- 8300上的SDIO的硬件驱动程序，对嵌入式开发有一定的参考意义-8300 on the SDIO hardware drivers
sdio_cis
- STM32F103 WIFI SDIOsdio\src\sdio_cis.c