资源列表
FFT1
- FFT实现，此代码已在PC机上成功调试，并已成功移植到Nios2上-FFT realize that this code has been successful in the PC, debugging, and have been successfully transplanted to the Nios2
fgsdfgfgsfPT0611
- PT0611打印机代码,可用于学习用,如果有需要可以下载-Printer PT0611 code, can be used for learning, and if necessary can be downloaded
fgyi
- 这是个嵌入式程序，拷贝后直接运行即可，适用于嵌入式开发-This is embedded procedures, copy operation can be directly applied to the embedded development
FIFO64
- FIFO级联，利用verilog语言实现Xilinx FIFO18单元的多个级联，增大FIFO深度。-FIFO cascade, using Verilog Xilinx FIFO18 language to achieve a number of cascade units, increasing the FIFO depth.
fifo_datapath
- verilog实现，串转并通过fifo再并转串，可以满足输入速率自由输出的一半时，输出仍可持续发送-verilog achieved, and through serial switch and switch again fifo Series, Rate free importation to meet half of the output, the output is still sustainable Send
fig15_03
- 使用类模板实现链表操作，包括在链表开头、末尾插入值，在链表开头、末尾删除值。-Realize the use of class template list operation, including in the list at the beginning, at the end insert the value at the beginning of the list, delete the value at the end.
fig16_02
- A simple C++ program adding 2 integers.
Fileio
- 此程序会在支持FAT32的U盘上创建一个测试文件，因此需要插入一个U盘。这是在UDK2+VS2010环境下写的，我自己成功运行过。-After run this program,a test file will be created in u-flash which support FAT32.so a u-flash is needed.I succeed run it in the environment of UDK2 and VS2010.
filesystem__ok
- 操作系统文件管理，自己的操作系统大作业，绝对是自己编的-Document management system, its own operating system, major operation, it is its own series of
filterasm
- 基于51单片机的滤波程序，开发环境为keil uVision 3-51 microcontroller-based filtering process, development environment for keil uVision 3
final
- 检测电压并报警的源码，精度很高，基于MEGA16-Detection of the source voltage and alarm, high accuracy, based on the MEGA16
final1
- this one code of the HSPICE for simulation a mixer by CMOS technology -this is one code of the HSPICE for simulation a mixer by CMOS technology