资源列表
STM32F107基于以太网IAP
- st提供的基于stm32f107的采用以太网通信方式的IAP程序(IAP program based on STM32F107 using ethernet)
ds18b20
- 能够用stm32单片机为核心，通过ds18b20实现温度的检测，然后将实时温度显示在oled屏幕上(STM32 microcontroller can be used as the core, through the DS18B20 to achieve temperature detection, and then real-time temperature display on the OLED screen)
03-多路ADC转换-模拟串口发送
- 多路ADC查询采样，通过模拟串口发送给上位机，波特率9600 ，N，8,1,用户可以修改1~8路转换(Multi channel ADC query sampling, through the analog serial port sent to the host computer, baud rate 9600, N, 8,1, users can modify the 1~8 channel conversion)
串口1，DMA收发
- 基于STM32F103C8T6的串口通信实验，已调测通过(STM32F103C8T6 based serial communication experiment, has been passed through the test)
dsp(vf)
- 实现逆变器的VF控制，用的是DSP28335进行控制。(To achieve the VF control of the inverter)
OV7725
- 用STM32F4芯片自带的DCMI摄像头接口驱动不带FIFO的OV7725摄像头，实现60HZ刷新率。imgprcs.c文件中包含大量的适用于嵌入式设备的高速图像处理算法，包括边缘提取、区域分割、颜色识别等等，全部使用自适应算法，适合不同光照和环境条件(With STM32F4 chip comes with DCMI camera interface driver without FIFO OV7725 camera, to achieve 60HZ refresh rate. The img
TFT8(20161205)
- 采用NUC972芯片加载一块8寸显示屏，实现电梯内图片广告效果和电梯楼层显示。(Use NUC972 chip to load a 8 inch display screen, to achieve the elevator picture advertising effect and elevator floor display.)
1.STM32-MPU6050_DMP测试例程
- STM32-MPU6050_DMP测试例程(Stm32-mpu6050_dmp test routine)
SPWM
- 全桥逆变电路的控制波形，由STM32芯片产生SPWM波。(Full-bridge inverter circuit control waveform, generated by the STM32 chip SPWM wave.)
鹰眼摄像头采集
- 这是基于IAR编译器平台的开发程序，采用OV7725数字摄像头，传输图像到K60微处理器(This is a development program based on the IAR compiler platform, which USES the OV7725 digital camera to transmit images to the K60 microprocessor)
0.96(arduino)
- arduino对0.96寸的TFT屏幕驱动程序(Arduino for 0.96 inch TFT screen drivers)
20、FATFS-文件系统
- 基于STM32F103的FATFS文件系统的例程，实验通过可以正常使用。(STM32F103 based on the FATFS file system routines, experiments can be used normally)