资源列表
ShanYu
- 改程序为删余程序，它可以实现3/4,2/3的删余功能，并且通过QUARTUS II 软件编译。-Change the procedure for puncturing procedure, which can be achieved punctured 3/4, 2/3 of the function, and by QUARTUS II software compiler.
verilog-0.9.7.tar
- iverilog 0.9.7源码文件，Verilog转换工具-iverilog 0.9.7
NIOSII
- 用NoisII软核实现超声波测距的时序和485通信-Soft-core with NoisII timing and realization of ultrasonic distance measurement 485
anjian2
- EP2C35F系列开发板关于机械按键的消抖实验，测试，仿真代码-EP2C35F Series development board on key debounce mechanical experiments, testing, simulation code
LGFXY
- EP2C35F系列开发板关于简易逻辑分析仪的设计，仿真，使用外置ADC芯片-EP2C35F Series development board on simple logic analyzer design, simulation, use an external ADC chip
szxszw
- 数字钟（4位）的显示计时现显示和带全置位功能的非常完善的时钟设计，设计层次清晰-Digital clock (4) the timing of the display and will now be displayed with full set of clock function very well designed, clear design hierarchy
uart_verilog.tar
- 在FPGA上实验UART的verilog源码,可综合,已测试OK.-The experimental UART on FPGA verilog source
lcd_i80_verilog.tar
- 在FPGA上通过i80(intel 8080)接口驱动LCD的verilog源码.-In the FPGA i80 (intel 8080) interface to the LCD driver verilog source.
Multiply8-6
- FPGA verilog用移位相加的方式来实现8位的乘法器-FPGA verilog With shift and add a way to achieve 8 multiplier
LED_SCAN1
- FPGA 四位数码管的动态显示-数码管动态扫描模块-Dynamic FPGA four digital tube display- digital dynamic scanning module
datapath
- 单片机PIC16C5X的datapath代码，包括ALU,alu_mux,w_reg和各个指令的代码-The datapath PIC16C5X microcontroller code, including ALU, alu_mux, w_reg and each instruction code
MRAM2012
- STT-MRAM磁性存储器全部verilog代码和仿真验证代码，包括行为模块，读写模块和控制模块，已经经过验证完全正确-STT-MRAM magnetic memory all the code and simulation code, including behavior module, reader module and the control module, has been proven entirely correct