资源列表
djyos
- 自己写的一个新OS系统,已经在多款产品上应用,系统十分稳定.-Write a new OS system has been applied in variety of products, the system is stable.
Alarm
- 报警声程序 功能：操纵蜂鸣器发出报警声 C51文件夹为C51文件实现 ASM文件夹为汇编文件实现-Alarm sound program* * Function: manipulation of the buzzer alarm will sound* * C51 folder C51 file* * ASM folder as the assembly file
spp_dev_b_debug
- Bluelab3.6.2 在原有spp_dev_b（device slave）例子加上了用SPP接收和发送数据功能，内置debug log(spp_dev_b_Log.TXT)。打开有message 输出信息 要定义DEBUG_ENABLED即可。可以移植其他项目中 -Bluelab3.6.2 in the original spp_dev_b (device slave) with examples of using SPP to receive and send data capabil
stm32-485
- STM32芯片进行485通信，很不错的程序-STM32 chip 485, a very good program
project
- avr单片机加外围三个传感器，分别是SMB380三轴传感器，ST10温湿度传感器，用iic控制,串口跟主机通讯-avr microcontroller plus three external sensors, namely the SMB380 triaxial sensors, ST10 temperature and humidity sensors, with iic control, serial communication with the host
glcd_ks0108_v11
- Graphic Library for KS0108 Controller (128x64 Dot Display). Written with gss AVR- Compiler.
JK-flip-flop
- 带有异步置位复位端的上升沿触发的JK触发器，使用VHDL语言实现的-Asynchronous reset terminal set with rising edge triggered JK flip-flop, the use of VHDL language
8_TIMER0INT
- 利用AVR单片机Mega16的定时器0的溢出中断实现2.5KHz的方波
CC1100
- cc1100的程序，可以用于无线传输，大家可以参考-Cc1100 program, and can be used for wireless transmission
proteusclock
- proteus仿真时钟，带液晶模块，带按键，液晶上显示时间。不错，可以参考一下。-proteus simulation clock, with LCD module, with a button, LCD display time. Yes, you can reference.
RS_bmq
- 在QuartusII软件中用Verilog HDL编写的RS编码器的源代码-The RS encoder Verilog HDL prepared with in QuartusII software source code
I2C
- 单片机at24c02，E2PROM测试，I2C总线，写完数据再读取，点亮第一个发光二级管-Singlechip AT24C02, E2PROM test, I2C bus, write the data and then read, lighting the first light emitting two tubes!!!!!!!!!!!!!!!!!!!!!