资源列表
1602
- 内容：通过标准程序静态显示字符 引脚定义如下：1-VSS 2-VDD 3-V0 4-RS 5-R/W 6-E 7-14 DB0-DB7 15-BLA 16-BLK-Content: Through the static display character pin standard procedures are defined as follows :1-VSS 2-VDD 3-V0 4-RS 5-R/W 6-E 7-14 DB0-DB7 15-BLA 16-BLK
Robot-fire-fighting-procedure
- 本程序是基于单片机的c++程序。本机器人采用左手走规则，左手走规则是指机器人始终沿着左面的墙壁行走，一直走完全程。在行走的过程中按照起点、一号房间、二号房间、三号房间、四号房间的顺序搜索火源并灭火。机器人首先读取传感器信息，然后对传感器的信息进行判断。如果发现火源，则进入灭火子程序，该子程序完成趋光、灭火等功能。-This procedure is based on single chip microcomputer c++ program. This robot USES the left h
dpj
- 将内存区定义的字母数字串的统计结果以16进制形式显示出来的汇编语言-The statistical results memory area defined alphanumeric string is displayed in hexadecimal form out of the assembly language
CP1
- 采用c8051f020芯片，此程序可完成CP1比较器的比较功能，比较器基准信号来自于VREF引脚,比较器响应后将产生中断,可在中断程序中设断点观察.-Using c8051f020 chip, this program can complete the comparison function comparator CP1, the comparator reference signal from the VREF pin, the comparator will respond to inter
stepmotor
- 步进电机驱动程序。ICCAVR开发。ATMEGA8
DSPcode
- 用汇编写的dsp源代码，包括正弦波发生器、交通灯、滤波器，调试可通过。
rfid_checkout_system
- 基于avr芯片的射频识别的的进出检查系统，网络上下的，需要的可以参考参考-Radio frequency identification out of the inspection system base on avr, the network up and down, can refer to reference
com
- 最新1211单片机的源代码，串口通讯，程序已经经过成功调试。上载的5个程序均是自行编写调试实用的源代码，请验证。-1211 Singlechip latest source code, serial communications, the program has been successful debugging. Upload five procedures are prepared to debug the source code useful, please verify.
LinuxDevice
- Linux设备驱动新手入门，自己总结的。-Linux device driver novice started their own past experience.
10k_frequency_generator
- 10k频率发生器,出来的是矩形方波，直接可以使用。-10k frequency generator, out of a rectangular square wave can be used directly.
hongwaijiemachengxu
- 红外遥控接收界面程序，在1602上显示接收到控制代码。-Infrared remote control receiver interface program, in 1602, received the control code.
RC500clib
- rc500 c语言库函数，对RC500的开发提供了捷径-rc500 c language library functions, the development of RC500 provides a shortcut