资源列表
ns2-cmu
- The CMU Monarch extensions to ns [4] provide new elements at the physical, link, and routing layers of the simulation environment. Using these elements, it is possible to construct detailed and accurate simulations of wireless subnets, LANs, or m
FFT_more
- DSK6416板上中的FFT以及IFFT的实现，可将结果存储在SDRAM中。可在CCS v5中运行-The FFT and IFFT DSP implementation, the results can be stored in the SDRAM. (Can be run in CCS v5)
CC2420_initialize_internal_registers
- 对 CC2420 寄存器进行初始化，设置CC2420 寄存器数值，并读取设置的寄存器的数值。 本实验以CC2420 中的MDMCTRL0 为例，进行设置，并读取其设置的数值在串口工具上显 示出来。-Initialization of the CC2420 registers set CC2420 register values, and read the register set value. In this experiment, CC2420 in MDMCTRL0, for exa
sjf4510-cm
- 在windows下flash烧谢程序 for s3c4510b-under the windows flash burn Xie procedures for s3c4510b
uctap
- ucTAP is a program to emulate ST20 Micro Connect Box functions over a basic JTAG interface.
displayontime
- MSP430实时采集加速度数据的实时显示程序，调试通过可用使用-MSP430 acceleration data collected in real time, real-time display program, available through the use of debugging
serial-port
- 51单片机的串口程序，内有源码，和proteus仿真图-51 MCU serial procedures, within the source code, and proteus simulation diagram
protel
- 用protel画的51单片机，L298驱动-c51 L298 use protel
arm_fft
- 基于ARM7内核的ADS1.2的fft算法库，用于波形分析，局部经过了代码优化
DEC5502_SDRAM_demo
- 实现对TMS320V5502 DSP芯片片外EMIF存储器的访问。此芯片支持和SDRAM的无缝连接，应用方便，只需设置几个寄存器即可工作-TMS320V5502 DSP chips to achieve on-chip memory EMIF visit. This chip SDRAM support and seamless connectivity, applications easier, simply register to set up several working
DISPLAY
- 本程序是显示模块的例程，所接器件为四位八段led数码管，其中PTB0-PTB3 与数码管的位选相连接，PTB4，PTB5与74LS164连接确定你开发板上拨码开 关JP1（图片上的12）的两位和JP4（图片上的9）的5、6、7、8位处于on）， 而其他位处于远离on！
40LedArry
- 是一个40*40点阵的例子，已经调试通过可以直接使用~-A 40* 40 dot matrix example, debugging has been through can be used directly ~