资源列表
2833xScia_FFDLB
- DSP2833x片内SCI的FIFO数字回扫测试-SCI within DSP2833x piece of FIFO digital retrace test
Sinwave
- 使用HSI为系统时钟源，并配置恰当的分频比； Timer1 CC1，CC2，CC3通道配置为PWM模式；-Use the HSI for the system clock source, and configure the appropriate divide ratio Timer1 CC1, CC2, CC3 channel is configured to PWM mode
AD_int
- HC08 单片机AD采样（进中断）例程，运行通过
LinuxDeviceDriver
- linux设备驱动教学课件，字符驱动，内核调试，竞态，中断，高级io-linux device driver Courseware
TouchscreenandSCMCommunications
- 触摸屏与单片机的通讯,实现触摸屏与单片机的通讯,主要是解决通讯协议的问题。本文使用开放的Modbus通讯协议,以触摸屏作主站,单片机作从站。eView触摸屏本身支持Modbus通讯协议,如果单片机也支持Modbus协议,就可以进行通信了。-Touchscreen and SCM communications, achieving Touchscreen and SCM communications, mainly to resolve the problem of communication p
OS_Sieral_OK_(No_fifo)
- 这是本人调用small rtos51的函数来仿真写的基本代码-This is a small rtos51 I call a function to write the basic code simulation
345xie
- ADXL345写代码 利用嵌入式系统控制三维加速度传感器必备-ADXL345 write code using three-dimensional acceleration sensor embedded system control must
16M-frequency-measurement
- 基于msp430的等精读法测频率 精度可达小数点后五位以上，最高频率可达200khz-Based on msp430 and intensive reading method of frequency measurement precision can reach more than five decimal places, the highest frequency of 200 KHZ
duogongnengshizhong
- 用单片机实现的多功能时钟，可设置时钟和内设三个闹钟，操作简单方便实用。-Multifunctional MCU clock, you can set the clock and alarm features three easy operation and practical.
LEDBLINK
- 在十分广泛使用的三星s3c44b0x开发板上使用,用来检测目标板是否正常工作.
SPI-project(proteusamikrobasic)
- pic 18f2550 connected to temperature sensor via SPI interface , press the button and then temperature will be displayed
AT91RM9200-AD-TLC3544
- AD芯片TLC3544在ADS下的调试程序-AD Chip TLC3544 ADS in the debugging process