资源列表
MODBUSxieyi
- modbus协议说明文档 在工控领域 modbus协议是使用最为广泛 最简单的一种协议-modbus protocol documentation in the field of industrial modbus protocol is the most widely used simple protocol
Exp6-LCD
- 在嵌入式ARM的开发环境：IAR下，驱动640*480的LCD的源代码，还包括串口初始化，方便修改进行串口调试。-In the embedded ARM development environment: IAR, the driver of the LCD 640* 480 source code, including the serial port initialization, easy to modify for serial debugging.
c54xdtmf
- tms320c5409 dtmf source code
scia_looptx_intrx
- 2808例程 spi例程 便于新手学习和老手的开发-2808 routines spi routines for learning and the development of the new veteran
SCCB-driver
- OV系列数字摄像头，三种SCCB驱动程序,在不同平台上移植.-OV series digital camera, three kinds of SCCB drivers on different platforms transplant.
ext_bus_nandflash
- MB9BF516R的例程，外部nand flash的，测试可用，在具体使用时自己参考下芯片手册，根据自己设置配置-MB9BF516R routines, external nand flash, the test can be used when the specific use your own reference manual under the chip, according to their own set configuration
cc2430_point_to_point
- 1：打开IAR开发环境，打开光盘里程序工程。 2：连接 DTD243A_Demo板，并把P1座的短路块插上，把程序下载到两个模块上。 3：对于要发送数据的模块，把其DTD243A模块扩展接口的16脚P0.1与15脚P0.0用短接冒短接起来；而用于接收的模块把模块扩展接口的16脚P0.1与17脚P0.2短接起来。 4：为两个模块通电可以看见两个模块在通讯（两个模块的P1.1上的D33灯和P1.0灯D32都交替闪烁）。-1: Open the IAR deve
54xfxmth
- tms320c5409 demo source code
HT48XXX-TM
- 对合泰单片机HT48**的定时器进行详细解说T和分析 -Holtek microcontroller HT48** timer for a detailed explanation of T and analysis
danpianjishuangjitongxunfangshi
- 单片机双机通讯(方式1) 单片机双机通讯(方式1)
sim-51-code
- 包含SAM卡的个钟头文件和相关程序源码，希望对大家有用-including SAM card code and others
Verilog-VGA
- 运用verilog,描述了vga工作时序-Use verilog, describes the VGA work timing