资源列表
fske-dianji
- 飞思卡尔用XS128的PWM口写的控制电机转速的程序-Written procedures to control the motor speed by Freescale XS128 the PWM port
vhdl_cookbook
- The VHDL Cookbook First Edition
1602code
- 用keil 51平台编译通过 源代码里面含自建字库的创建和应用 文件里面有1602液晶的详细资料
nandstartup
- arm2410板支持nand启动的开发详细过程-arm2410 board to support the development of detailed process to start nand
EX07_EXFlash
- 实验说明:外部RAM实验联合进行的,先是给外部 RAM里面写写入数据,然后把数据写到外部FLASH里面 实验结果:在指定位置设置断点后可观察通过函数来写到FLASH里面的值-Experiment descr iption: external RAM experiment carried out jointly, first write to external RAM which to write data and then writes the data inside the experimen
Flash
- 是DSP2812的开发源码，此开发文件是Flash烧录的源代码-Is the DSP2812' s open source, this development of File is the source code for Flash programming
RTL8187wince5
- RTL8187L wince5.0驱动； 注意是x86构架，自己编写了一个cec导入pb。 希望有人上传ARM构架驱动。
USBHID
- lpc2478USBHID.rar lpc2478开发板自制于usb通讯用于调试 usb实验-lpc2478USBHID.rar lpc2478 development board made in the usb communication for debugging usb Experiment
lab24-PWM
- 这个程序是利用DSP产生PWM波形的源程序，里面的历程也比较全，适合初学者，也有相当的注释，适合版本是CCS３.３以上。-The software is suitable for the version of which is over CCS 3.3 .It is used to generate for the wave of PWM.
snifferUSB
- 读取usb信息，非常有用，另外还有源码供大家学习之用，真的很不错的-read usb information, very useful, there is another source for all learning, really good
C51_Timers_Program_Example
- C51 Timers Program Example. 80C51单片机定时器例程. Atmel官方例程，C和汇编都有，很有帮助-C51 Timers Program Example. This section provides the C and Assembler program examples for Timers applicable to all C51 devices.
ex_linkRX
- 这个程序用于单片机和无线传输芯片CC2500之间的传送，包括发送，驱动，接收等完全的程序-This procedure for single-chip and wireless transmission between the CC2500 chip, including the transmission, drive, receive a complete program, etc.