资源列表
armok01131144
- 使用ds1302和LCM1602的时钟程序-The use of the clock ds1302 and procedures LCM1602
uart_core_vhdlORverilog
- 串uart的vhdl，verilog，lattic实现原码 里面有四个文件,分别UART 源码 (lattice version)\\uart 源码 (Verilog)\\uart 源码 (VHDL)\\uart16550.tar-uart series of vhdl and verilog. lattic achieve the original code, there are four documents, Source respectively UART (lattice versi
sci_send-and-receive
- 该程序为一个典型的可烧录的SCI的发送、接收程序，采用自循环即自己发送自己接收的方式。-The program for a typical lossless SCI of sending and receiving procedures, adopt the way of sending yourself receiving from the loop.
danpianji
- 基于单片机的抢答器设计，采用外部中断控制，可以实现即时并正确判断，比软中断准确。-Responder microcontroller-based design, the use of an external interrupt control, instant and accurate assessment than the soft interrupt accurate.
Modelsim 5.8C_crack
- Modelsim 5.8C_crack
wash
- 一个用VHDL程序写成的VHDL程序
1563_673_176_Paper
- test upload fpga huffman
GEopccode3
- OPC服务器源代码，可以运行和自注册，并可通过标准OPC客户程序读写数据-OPC server source code GE. Can run and self registration, accessible through standard OPC client program to read and write data.
xs128Project
- xs128 舵机测试源程序 当要舵机转60度时,高电平保持时间为1.5ms+0.5/45,再根据这这个值求占空比-Xs128 servo control test source
AD
- 一个使用VHDL语言实现AD采样控制及其数据的存储实现，让大家借鉴借鉴学习，也希望大家提出意见-Inside is a sampling AD using the VHDL language and its data storage to achieve control, so that we learn learn
MSimulator_v120Release
- MSimulator是windows下的arm模拟器，可以模拟出nand flash,serial port,touch LCD,keyboard，等-MSimulator windows is the arm simulator, can simulate nand flash, serial port, touch LCD, keyboard, etc.
ETK6201
- 厂家没有公布的Datasheet! ETK6201 是1/7～1/8 占空比的 LED 显示控制驱动电路。由 11 根段输出、6 根栅输出、1 根段/ 栅输出，1 个显示存储器、控制电路、键扫描电路组成了一个高可靠性的单片机外围 LED 驱动电路。串行数据通过4 线串行接口输入到 ETK6201 ，采用SOP32 的封装形式。-The manufacturers did not announce the Datasheet! ETK6201 is 1/7 to 1/8 duty cycle LE