资源列表
beep
- LPC2214进行UC/OS下的蜂鸣实验.-LPC2214 for UC/OS under the beep test.
lession115TC9012
- 这是一个基于LPC1768 Cortex-M3的红外TC9012处理程序-This is a handler based on the LPC1768 Cortex-M3 infrared TC9012
vhdl_fifo
- 用vhdl编写的fifo队列.可以在maxplus2平台上使用.-using VHDL fifo prepared by the cohort. Maxplus2 platform can be used.
S3BOARD-demo
- Embedded Arm7 Demo program
25811208hart
- HART协议8.0概述，对于了解HART和学习HART非常有用-HART protocol outlined in 8.0, for the understanding of HART and HART very useful learning
8051IP_Verilog
- 8051核，verilog实现。可以直接用在FPGA中，在此基础上可以和用真正的8051一样的进行单片机的学习。-8051 Nuclear, verilog achieve. Can be directly used in the FPGA, in this basis can be used as the real conduct of the 8051 single-chip learning.
2402LCD_DigitalClock
- 时钟是用微控制器， 2402年和LCD 。程序写于角这个项目是在 PROTEUS 测试成功-The Clock was made with MCU, 2402 and LCD. Programe was written in C. This project was tested successfully in Proteus
lingyang_yuyin
- 用凌阳61单片机实现的语音识别控制功能实现了名字呼叫，识别控制等功能，修改下可用于家居灯的控制-Sunplus 61 MCU with the voice recognition control to achieve a name call, identifying controls and other functions, modify the following can be used to control home lighting
digital-tube
- 实现开发板上的数码管静态循环显示0~F。通过这个实验，掌握采用Verilog HDL语言编程实现7段数码管显示译码器的方法。-The digital realization of the development board cycling static display 0 ~ F. Through this experiment, using Verilog HDL language to master programming 7-segment display decoder method
LC75824_LCD_tester
- 三洋LCD驱动芯片LC75824在华邦W79E825上的驱动程序。已应用于工厂LCD产品的测试。-This is LCD driver LC75824 source code. which was used on LCD product test in industries.
szdyb
- 基于TMS320F2812的平台，应用其内部AD，对信号进行采并处理，最后将电压有效值，频率等参数通过12864液晶进行显示-TMS320F2812-based platform, the application inside the AD, the signal is sampled and processed, and finally to the rms voltage, frequency and other parameters through the 12864 LCD displa
NucleusPlus_for_arm
- nucleusPlus是一个优秀的多任务调度内核，本源码为其基于arm9的移植方案-nucleusPlus is an outstanding multi-task scheduling core, the source code for its ARM9-based transplant programs