资源列表
multiprocessor
- NIOS 多核例程 调试过 4 cpu NIOS 多核例程 调试过 4 cpu-NIOS-core routine over 4 cpu NIOS debug multi-core debug 4 cpu routines
OLED
- 在Keil中编写程序，利用STM32单片机在OLED显示时钟-Keil written in the program, use STM32 microcontroller clock OLED display
MC9S12DP256
- this document is a datasheet of microcontrolleur MC9S12DP
AT91SAM9G45M10_WinCE_BSP
- AT91SAM9G45M10EK file and ATMEL file is a part of the SAM9G45 Board BSP for WinCE6.0 respectively.
KEY
- 使用STM32F103对LED、LCD进行控制，呈现页面初始化、屏幕背景及字幕显示。(Use STM32F103 to control LED and LCD)
stm32正交编码接口（QEI）
- stm32编码器模式设置，还含有相关PDF说明文档以及网页(STM32 encoder mode setting)
SDI_controller
- 项目:用到FPGA驱动GV7600输出SDI信号，输出分辨率1920*1080p，首先，了解GV7600芯片的特性功能，按照bt1120协议传输10位Y，Cb，Cr数据；其次，我的项目中用的是10位通道分时复用传输Y，Cb，Cr数据；配置引脚很重要，当初verilog代码写好了，因为硬件引脚配置错误，导致调试一直不通；同时，sof文件也要一直更新(Based on FPGA to design the drive controller of GV7600)
NuMicro-ICP
- NUC100系列单片机ICP编程工具，可通过NU-LINK编程器向开发板烧写程序-ICP NUC100 series microcontroller programming tools available through NU-LINK programmer to program development board programmer
51write
- 51单片机烧写软件,希望对大家有些用处.-burning software, we hope to use some.
NRF24L01
- 使用nrf24l01模块实现mcu之间的通信功能，程序简单易懂，配备了一些文字说明-Use nrf24l01 mcu module communication between the procedures are simple, with some text
chengxuwenti
- 很好的飞思卡尔智能车程序，用到很复杂的数据算法哦。-Freescale Smart Car program, a good used in very complex data algorithms oh.
NAND_Flash_Interface_DF
- actel NAND Flash Interface Design Example