资源列表
I2CTesting
- 在evc下的i2c测试程序 用于wince平台，非常实用，赶紧下吧。-The evc under the i2c test program for the wince platform, very useful, and quickly under the bar.
ADXL345
- STM32F10ZET6驱动加速度计源代码可以实现显示加速度及角度信息-STM32F10ZET6 drive accelerometer source code can display acceleration and angle information
USART1接发
- 串口控制数组的发送，代码主要写在中断里，通过了(Serial control array sent, the code is mainly written in the interrupt)
A4_Key1
- 使用verilog 硬件描述语言编写的按键电路模块，希望对大家有帮助！(Using Verilog hardware descr iption language to write the key circuit module, I hope to help you!)
FFT.rar
- 基于VC++的FFT变换算法的实现，用在中石油测井中,the FFT of VC++
nrf-receive
- 基于STM32的 NFRL240接收程序 基于Cortex-M3-Receiving program for the NFRL240 of the STM32 Cortex-M3 based
LED
- stm32f207ZGT6通用IO口控制LED灯显示-Stm32 general IO port control LED light show
3.12OLED-datasheet
- 3.12寸分辨率为256X64的OLED的驱动程序，内包括原码、说明资料，屏规格书等等，可以借鉴来编写自己的OLED驱动程序-3.12 inch OLED drivers, including within the original code, explanatory information, screen specifications, etc., you can learn to write their own drivers for OLED
calcu
- 一个很完整的计算器代码，能实MS,MR,M+,MC等功能，在wince环境下开发，所用的开发工具是evc。这个程序比较完善，希望大家喜欢，谢谢！-A very complete calculator code, can really MS, MR, M+, MC and other functions, wince environment in development, the development tools used in the evc. Fairly complete this pro
waterlights_fsm
- 采用Verilog语言，编写三段式状态机，实现流水灯操作，已测试验证通过-Using Verilog language, written in three-state machine to achieve water lights operating, it has been verified by test
UCOS2.52
- UCOS II 2.52末做任何修改的源码，内有电子书一本及PC代码。经验证好用.-UCOS II 2.52 at the end for any changes to source code, there are books one and the PC code.
实验5：按键
- 利用板子的4个按键，控制板子上的4个LED(Use the four buttons of the board to control the four LEDs on the board)