资源列表
Taximeter
- 出租车计价器（其中包括分频模块，计程模块，计时模块，计费模块，显示模块以及顶层模块），基于Verilog HDL语言，开发板是FPGA(Sparten 6 LXS45),开发环境是Xilinx。-Taxi meter (including frequency module, the meter module, timing module, billing module, display module and top-level module), based on Verilog HDL lang
TQS3C2440TEST
- 天嵌S3C2440开发板 测试程序- S3C2440
1602
- 单片机1602遥控解码程序，本程序主要是遥控器解码和1602驱动程序，遥控器芯片:tc9012-0-SCM 1602 remote control decoding procedure, this procedure is mainly remote control decoding and 1602 drivers, remote control chip: tc9012-011
5
- guide on arm processor e book
Open18F4520
- microchip pic18f4520单片机代码-microchip pic18f4520
Tetris
- 实现俄罗斯方块的实验，这个是关于单片机的开发，实现俄罗斯方块的功能。(To realize the experiment of Tetris, this is about the development of the single chip computer and the function of the Tetris block.)
串联型稳压电源
- 基于STM32F103的串联型稳压电源。普中的红外遥控输入设定电压， (SPI)TLC5615DA输出作为基准电压，AD用ADS1115，(IIC)OLED显示电压、电流。过流保护。输出0-12V。 附件包含原理图+程序+红外遥控按键说明(Based on STM32F103 series regulated power supply. The infrared remote control input set voltage, (SPI) tlc5615da output as the ref
TQ2440
- ARM9开发板（TQ2440）完整测试程序.包含串口，SPI，LCD等全部芯片功能。-ARM9 development board (TQ2440) complete the test. Including serial, SPI, LCD, and all other chip functions.
wireless-communication
- 基于单片机的无线通信，可以双向实现数据的收发-Microcontroller-based wireless communications, two-way data transceiver
pousuiji
- 颚式破碎机工作原理、原理图自动绘制，友好的用户交互界面，可根据要求修改参数-Jaw crusher works, the schematic is drawn automatically
Test
- 关于S3C2440的蜂鸣器，LED灯，按键等等的测试程序-On the S3C2440' s buzzer, LED lights, buttons, etc. The test program
uCOSDEMO
- 目前基于并口LCD的ucGUI的移植很多，而几乎没有针对SPI接口LCD的ucGUI的移植，这是在金牛开发板上移植的SPI接口LCD的ucGUI，显示芯片是lgdp4531。-There s many ports of ucgui based on parellel mode of LCD and there s no ports of SPI mode. The code is the ucGUI port of SPI LCD based on golden bull development