资源列表
USART、模数转换、LED等程序
- ATmega128开发的16个控制程序，包括USART、模数转换、LED等程序，对ATmega128的初学人员很有帮助-16 of the ATmega128 development control procedures, including USART, ADC, LED and other procedures, staff very helpful learning the ATmega128
13-45
- 本程序能够完成的功能是，自动或手动测温，读取配置寄存器，温度下限寄存器，温度上限寄存器，设定温度上限及下限，当温度到达预定的温度的时候报警。所有的读取操作都可以在数码管上显示。其中，温度的上限通过计算机用串口通信协议传输给FPGA内部寄存器然后按动开关写入。同时，本程序还驱动了一个直流电机，温度高的时候电机转速高，温度低的时候转速降低直至停转。数码管可以实时显示电机转速，2秒刷新一次。数码管的显示可以在显示的温度、寄存器值和直流电机转速间切换，切换通过串口进行，计算机发00H时切换到温度及寄存器
_NRF24L01(2012.3.1)
- 采用stm32f103vet6芯片对24C01的存储读取(Storage and reading of 24C01 program)
串口 通讯和选择开关控制继电器
- 作者 raojun 自己写的一个用库函数方式操作单片机来实现对工业设备控制，并且可以用单片机的串口通讯与外界的系统交互！ 您可以稍作修改来用于制作用一部上位机来远程控制的机器！(The author raojun wrote a library function to operate the single-chip microcomputer to control industrial equipment, and it can interact with the external syste
HDMI_ADV7511
- HDMI芯片ADV7511资料介绍，其中AN1270里面有一套DEMO源码，可以显示。-The information on the chip ADV7511 HDMI, which AN1270 document DEMO inside source confirmed with the DEMO display.
rf2401
- rf2401的资料代码，其中还有原理图。-rf2401 information code, which the schematic.
PC_Remote_Girder
- PC_Remote_Girder PC遥控器的上为机和单片机代码
SmartARM2200-classware-chapter_6
- SmartARM2200 多媒体课件第6章，针对学习嵌入式系统开发-SmartARM2200 multimedia classware chapter 6. Studying for embedded system development.
SPWM
- stm32f103rb6的定时器1产生6路互补PWM波形，相位频率可调节-stm32f103rb6 timer generates a 6-channel complementary PWM waveform, phase frequency can be adjusted
Question3
- One of the cameras used by the system was found rotated by 45 degrees to the right. This caused all images captured by this camera to be rotated by 45 degrees. Rotate the images back about their center, copy the remarkable pixels (white backgro
Ucosii252forlpc2100
- C 语言编写的LPC2100系列UCOS_II源码例程-C language source code of the LPC2100 series UCOS_II routine
Virtex2_Manual
- Xilinx is disclosing this user guide, manual, release note, and/or specification (the "Documentation") to you solely for use in the development of designs to operate with Xilinx hardware devices. You may not reproduce, distribute, republish, downlo