资源列表
lcd
- 适合于cortexM3的12864液晶程序。测试通过，很好用。其中包括所有一般显示功能所需的函数，只需要调用即可实现自己需要的功能。-Suitable for the cortexM3 12864 LCD program. Through testing, it is to use. Including all general display function of the required function, can be realized just need to invoke to fun
STM32-M3-PWM
- 基于STM32的脉宽可调的PWM输出，可驱动蜂鸣器音调可变(Pulse width adjustable PWM output based on STM32, can drive the buzzer variable tone)
Modbus1
- STM32F103，modbus协议，485通信，读传感器的值(STM32F103, Modbus protocol, 485 communication, read sensor values)
LCD1602_hot
- STM32， 嵌入式开发， LCD1602液晶驱动， 使用的固件库为V3.5-STM32, Embedded Development, LCD1602 LCD driver, used for the V3.5 firmware library
ADS1281驱动
- ADS1281单片机驱动源码，开发环境kei5，语言：c语言
13ludianpingjiance
- 可实现十三路电平翻转时刻的检测并通过串口输出给电脑显示。-Can realize 13 road level detection and time to flip through a serial port output to computer display.
CM3-PWM
- stm32 pwm control source project
HC-SR04
- 超声波测距，可以精确到0.1米，为stm32的程序，亲测可用。-Ultrasonic Ranging
fsh
- 这是我的毕业可用8位的LED显示，有小数点的。设计哦，可以用的。可供参考-VHDL-based digital frequency meter With the rapid development of electronic technology, FPGA/CPLD appear in its high-speed, high reliability, series parallel mode of outstanding merit widely used in the electronic
uCOS283_LPC2888
- 基于 Philips 公司的 ARM-7 使用之 uC/OS-II 作业系统,此例程是移植于 LPC-2888 上的应用,不同于一般的 Porting 其最主要是加入了支援 OS_View 观察器功能,于 IAR EWARM V4.41A 工程编译,而 uC/OS 版本为 2.83
hyd
- 火焰灯源码,已在产品上应用.使用STM32芯片.-Flame light source, has been applied on the product. Use STM32 chip.
ZIGBEE
- 系统基于stm32实现ucos移植，实现以太网通信，zigbee通信，界面信息通过gui显示-System based on uCOS to achieve STM32 transplantation, Ethernet communication, ZigBee communication, interface information through GUI display