资源列表
u-boot_for_blackfin
- u-boot, 支持bf533处理器，使用blackfin+uclinux的最佳选择。-u-boot support bf533 processor, Basis of Uclinux blackfin use the best choice.
ZigBee湿度自动上传
- Zigbee 温度串口自动上传，读取温度传感器，自动进行串口发送。(Zigbee temperature, automatic serial upload, read the temperature sensor, automatically send the serial port.)
fft3
- 是用verilog写的FFt源码，通过编译基本是正确，希望对大家有所帮助-Is written FFt verilog source code, compile basic right, we want to help
512点FFTVerilog实现
- 关于FFT Verilog代码实现的源代码
QQ2812
- DSP2812开发板上一系列的源程序，很有用，很全!-DSP2812 development board on a series of source program, is very useful, and very complete!
Balance Car
- 结合平衡小车之家写的平衡小车代码，可通过APP上位机控制平衡小车。(Combined with the balance of the car home to write the balance of the car code, you can control the balance of the car through the APP host.)
quartus 9.0 中FFT IP核的使用方法
- quartus 9.0 中FFT IP核的使用方法附带工程文件和用signaltapII抓到的波形,quartus 9.0 in FFT IP core attached to the use of engineering documents and the use of captured waveform signaltapII
NUC100SeriesBSP
- 16通道数据采集，AD转换，基于ARM单片机的程序编写，希望对大家有用-16 channel data acquisition, AD conversion, based on ARM microcontroller programming, hope useful for everyone
avr
- AVR的所有模块，EEPROM，USART,AD,定时中断，AVR软件界面熟悉，软件运行，-All modules in the AVR EEPROM, USARTs, the AD, timer interrupt, familiar with the AVR software interface, the software runs, etc.
gccbyqazwj
- 基于AVR单片机的程序开发软件，有利于迅速提高avr单片机知识。-AVR microcontroller-based application development software, is conducive to the rapid increase avr microcontroller knowledge.
time_three
- 基于sopc的三个定时器的三种应用，希望可以帮到学习FPGA的人，谢谢！-The three timer-based sopc three applications, the desire to help people learn FPGA, thank you!
DDR2_Control
- 参考例程之Verilog之实现DDR2时序控制实现，ISE开发平台完整工程(Implementation of DDR2 timing control implementation of reference routine Verilog, complete engineering of ISE development platform)