资源列表
PCF8563.rar
- 8563的程序，基于STM32单片机的！希望能对大家有所帮助，根据51驱动程序修改！！,Procedures for 8563, based on the STM32 MCU! To all of you would like to help, in accordance with amendments to 51 drivers! !
dual-ram
- 实现双口RAM映射到DSP地址单元空间中，使得双口RAM直接读取DSP中的数据或程序。-Achieve dual-port RAM modules mapped to the DSP address space, making dual-port RAM directly read the data in the DSP or procedures.
UART
- UART (universal asynchronous receiver transmitter protocol) working verilog
uart
- UART模块的verilog代码，经过测试，能够实现正常的接收和发送功能。-Verilog code for UART module has been tested, it is able to achieve normal receive and transmit functions.
pic16f877I2C
- 以PIC16F877为硬件平台，采用汇编语言编写的I2C模拟程序-i2c PIC16F877
CODE
- 使用的开发环境为matlab，本程序主要用于处理雷达采集到的数据，从而测量车辆等的速度，有很大的现实意义-Use the development environment of matlab, this procedure is mainly used for processing radar data collected, thus measuring the speed of vehicle and so on, have great practical significance
Encode_Decode.tar
- Encoder program for DVR
uClinux-CAN-BUS-Driver
- uClinux下的CAN总线控制器驱动程序源代码
conversion
- minigui单位换算程序 包括长度 面积 体积等公式的转换-minigui units conversion process, including the length of an area the size of the conversion formula, etc.
Atman_1602
- 本模块是一个电源项目的显示部分包含 1602的头文件以及相关液晶处理成年公序-failed to translate
SMC162
- SST89e51系列中LCD的显示代码。-SST89e51 Series LCD display code.
mini2440_pwm_motor_module.c.tar
- 这是mini2440的pwm波驱动程序，它试图利用mini2440输出pwm波来控制步进电机-This is the driver for mini2440 to output pwm wave, it is trying to use the mini2440 s pwm wave to control a stepper motor