资源列表
FFT_2812
- 该程序在TMSf2812上实现FFT运算-TMSf2812 the procedures in achieving FFT
lift
- 采用vhdl语言的电梯控制器源代码，能够实现报警，等待，并采用了标准的最优电梯运动路线。
Sum_of_2_rand
- We produce two 5-bit random numbers and then adds them. The two random numbers are generated by pressing two different push-buttons on the lab board. The addition is controlled by a third button, button3. it can be implemented on the Atlys board.
I2C_WRITE
- Verilog编写iic总线代码 控制EEPROM的写程序-Verilog code written iic bus EEPROM write control procedures
STM32_OLED
- STM32F103C8T6模拟IIC驱动OLED屏幕-STM32F103C8T6 simulation IIC drive OLED screen
mimasuo
- 改密码，输入三次错误以上报警，断电密码不丢失-Change your password, enter incorrectly three times more than alarm, power is not lost passwords
ZMain
- Zigbee开发的主程序，是整个开发过程的核心部分。-the most important part in the development of Zigbee protocol
DS18B20AD5300.08.09.05
- USB口的驱动程序 嵌入式芯片ATMEG系列 用于数据的输出传送-USB port driver for the embedded chip ATMEG series of output data transfer
msp430
- msp 430 精典学习代码-msp 430 classic learning code-msp 430 classic learning code
420
- 立式全自动包装机三菱plc程序，fx系列plc-very good
CY7C63723_i2c
- 这是利用CYPRESS CY7C63723汇编语言编写的读写AT24C512的程序，它已完全调试通过。-CYPRESS CY7C63723 use assembler language literacy AT24C512 procedures, it has completely through debugging.
hanzidianzhenzhishipai
- 汉字点阵指示牌的程序，是关于点阵的，显示的是汉字，能做流动字幕广告。-Chinese character dot-matrix signs procedures, on the lattice, and shows the Chinese characters, do mobile ads subtitles.