资源列表
altclklock
- 倍频锁频，VHDL程序，运行正确，可修改性强，最优处理
all
- 步进电机控制程序 能够控制电机正转反转加速减速 已经采用显示器显示等-Stepper motor control program to control the motor is reversed to have been adopted to accelerate the speed display, etc.
51-triangle-wave-generator
- 51单片机开发的三角波发生器，可以调节频率-Triangle wave generator, for the development of 51 single-chip microcomputer can adjust the frequency
gps
- GPS GPRMC协议解析（包括GPS的RTC时钟，经纬度）-GPS GPRMC protocol analysis (including GPS, RTC clock, latitude and longitude)
process
- 利用VHDL硬件描述语言来实现正余弦信号的产生-Using the VHDL hardware descr iption language to achieve the generation of a positive cosine signal
Spia_Eeprom_312
- atmelh312 spi接口eerom在28335下的接口驱动程序，包括读写各种整型及浮点型数据，设备上实用的程序。-atmelh312 spi eerom driver programme on 28335 include write and read function of int
HS12864
- hs12864 液晶显示程序 端口说明： 1 vss GND 2 VDD VCC(5v) 3 V0 VCC(5v) 4 D/I PC4 5 R/W PC5 6 E PC3 7 DB0 PA0 ... 14 DB7 PA7 15 CS1 PC1 16 CS2 PC2 17 RST PC0-hs12864 LCD procedures ports : a VSS GND 2 VDD VCC (5v) 3 V0 VCC (5v) 4 D / I PC4 5 R / W E PC3 recurring
音视频切换CXA2069 驱动代码
- 音视频切换CXA2069 驱动代码
CXA2069.rar
- 音视频切换IC CXA2069处理芯片应用代码。,Deal with audio and video switch IC chip application code.
eeprom
- 在arm-linux2.6.28版本上的基于I2C的EEPROM的模块（eeprom.ko)。-Version of the arm-linux2.6.28 EEPROM on the I2C-based module (eeprom.ko).
key_luoxg
- 项目开发中做的按键源代码，在MAIN中调用循环会在一定时间内进入一次按键处理-The key project development to do the source code, in the MAIN loop will be called within a certain period of time to enter a key deal