资源列表
LED
- 主要是LED屏的驱动,户外屏显示,程序中显示四个不停变化的图案.
menu
- 关于菜单操作设计的C语言实现，针对8位数码管和按键构成的人机界面。-Operation on the menu design of the C language, for 8-bit digital control and human-computer interface consisting of buttons.
Nokia5510LCD
- FREESALE单片机 完成5110液晶测试-FREESALE LCD MCU to complete 5110 Test
zuizhong1
- 该程序通过使用51定时器中断，编写的电子钟函数，结合数码管，可以显示年月日，经验证，程序功能完全实现-By using the 51MCU timer interrupt program, writing the electronic clock function, combined with digital control, can display the month, day, experience certificate, the full realization of the progr
2410TS
- 三星2410驱动开发学习，触摸屏源代码。比较简单的驱动实例-Samsung 2410 Driver Development study, touch-screen source code. Relatively simple instance of the driver
AM2901
- 2位的am2901，所有的功能都包涵，且功能很全。-2bit am2901
embeddedLinuxkernelclock
- 搞清楚RTC在kernel内的作用: linux系统有两个时钟：一个是由主板电池驱动的“Real Time Clock”也叫做RTC或者叫CMOS时钟，-Linux RTC
SYS_conf
- STM32F407时钟，中断配置头文件，该文件包含HSE,HSI,LSE,LSI,I2S,MCO时钟的初始化； PLL时钟配置，PLL,SYSCLK，HCLK,PCLK1，PCLK2时钟的配置； RCC,GPIO,EXIT,NVIC的配置；-STM32F407 clock, interrupt configuration header file that contains the HSE, HSI, LSE, LSI, I2S, MCO clock initialization PLL
TL16C550A
- 本文件夹中的代码是“TL16C550A”的驱动代码。 main.c 该文件包括了main主函数以及TL16C550A的初始化函数 TL16C550A.C 该文件包括了TL16C550读写寄存器、重启芯片等函数-main.c TL16C550A.C
codelock1
- 使用PIC16F84单片机设计电子密码锁,成型后的产品体积小巧，能很方便的嵌入防盗铁门。-PIC16F84 microcontroller design using electronic code lock, the product after molding small size, can be easily embedded in anti-theft steel door.
dm-delay
- A target that delays reads and/or writes and can send them to different devices.
STM32-eeprom-write-and-read
- 开发环境使用的keil 3；以STM32F103为主控芯片，实现了其与24LC256的数据存储及读取功能；-Development environment using keil 3 STM32F103 as the main chip to achieve their data storage 24LC256 and read function