资源列表
PIC16F877_clock
- 基于PIC16F877的秒表源码，驱动LED数码管，MPLAB编译环境。
LM3S-IIC
- 这是在LM3S cortex-M3 处理器上模拟IIC总线的程序，对学习IIC总线的朋友很有参考价值-This is the LM3S cortex-M3 processor simulation IIC bus program, the IIC bus to learn useful reference for a friend
GPIO
- ucos下arm7模块程序GPIO，大家来下载吧，个人的小总结，还是比较有用的-ucos under arm7 module program GPIO, you download it, own a small sum, it is quite useful to
RssiM
- 实现RSSI信号的16个Node节点采集程序，请注意对应的文件名，烧制时注意节点ID号。以下是完整的Node节点程序。-RSSI signal to achieve the 16 Node node collection procedures, please note the corresponding file name, firing the attention node ID. The following is the complete Node node procedure.
FPGA_SPI
- 本源码是用verilog语言编写的FPGA的SPI主机代码，可以用做SPI开发参考。-The source code is written in verilog FPGA SPI master code, can be used to develop a reference SPI.
gpio-int-test
- 嵌入式Linux下的GPIO中断测试程序-GPIO interrupt testing in embedded Linux
motor_pwm
- 基于51单片机的PWM电机速度调制程序设计，速度滤波算法控制。-51 microcontroller PWM motor speed modulation procedures based on the speed control filtering algorithm.
sht11
- 用于SHT11温湿度采集模块的单片机驱动，可实现定期的传感采集
7260_1602
- 基于MMA7260三轴重力加速度传感器的1602液晶源程序-Based on MMA7260 three axle load force of acceleration sensor 1602 LCD source program
wendupid
- PID技术，C代码文件，拷贝其中部分代码稍加修改就可以控制温度、流量、压力等。-PID technology, C code files, copy the code slightly modified some of them can control the temperature, flow, pressure and so on.
m25p80
- 在MSP430上，使用模拟SPI方式实现M25P80的读写驱动程序-use simulate SPI bus to realize M25P80 s driver
Flash_SST25VF064C_STM32F10x
- Flash_SST25VF064C_在STM32F10x芯片下的驱动-Flash_SST25VF064C_ Flash_SST25VF064C_