资源列表
LCM12832ZKcode
- LCM12832zk的驱动程序。由CCS3.1开发，TMS320LF2407中运行的显示屏程序。可以显示汉字。针对DSP时序解决显示乱码问题。
OOB_control
- 串行传输协议sata的物理层的控制模块的状态机-Serial transmission agreement of the physical layer control module sata the state machine.
danpianji
- 在单片机系统的P1.0口接上一个发光二极管，实现此灯的闪烁功能 在单片机系统的P1口接上8个发光二极管，实现低位4个和高位4个的交替闪烁。-In single-chip microcomputer system connected to the P1.0 port of a light-emitting diode, flashing lights to achieve this functionality in the single-chip microcomputer system of
zi2188
- 中兴高频头ZI2188源程序，2.4G的无线模组切换频道用。-ZTE ZI2188 source tuner, 2.4G wireless channel switch module with.
C
- ADI中平方根升余弦滤波器的DSP实现 2中方法-ADI in the square root raised cosine filter of the DSP method to achieve 2
LCDCM12864-16SLYB.c
- 型号为CM12864-16SLYB的128*64的一款LCD C驱动程序，程序中说明了对该LCD英文及汉字显示-CM12864-16SLYB model 128* 64, a driver for LCD C, procedures described in English and Chinese characters on the LCD display
5..PROG05_LCD_Locate_x_y
- BASCOM 8051 Project Use to Locate line in LCD
mcu-ds18b20
- 51单片机控制的DS18B20驱动程序，具备数码管显示功能，并能与上位机进行串口通信-MCU based of controling of DS18B20 driver code,and with display on 7-seg-led,at the same time supply the temp data to PC throuth RS232 port.
ds18b20
- 单片机控制的DS18B20驱动程序，可以通过数码管显示，并能通过串口发送给上位机（上位机发送$字符就可得到温度值）-DS18B20 driver, microprocessor controlled via the digital display through the serial port to send to the host computer (the host computer to send $ character can get temperature value)
dlt645
- DLT645协议程序，DTL645-1997的源代码，可以用于电能表的开发参考-The the DLT645 agreement program DTL645-1997, the source code, can be used for the development of the energy meter reference
IQS243_MSP430
- 基于MSP430的触摸IC_IQS243的源码-Based MSP430 touch IC_IQS243 source
EEPROM
- 基于msp430f449单片机的操作源码。主要完成EEPROM的操作。-Msp430f449 based microcontroller operation source. Mainly to complete the EEPROM operation.