资源列表
tlc1594qudong
- AD转换常用芯片，串行数据输出，转换时间低，占用IO口少-AD converter chip used, the serial data output, conversion time, taking up less IO port
freqm.verfinal
- 基于xlinx FPGA的频率计，顶层文件为freqm.v 可以直接仿真或烧写。通过外部选择闸门时间可实现不同量程。闸门时间有1s，0.1s，0.01s，0.001s可选。数码管显示6位数值。最高可测99M的信号输入。-Based on xlinx FPGA frequency meter, top-level file for freqm.v direct simulation or programming. External to select the gate time can be a
F12x_UARTs_STDIO_Polled_2UARTs
- UART poled for 8051f12x
LCD12864
- 12864LCD例子程序，已通过调试-12864LCD example procedure, had passed through debugging
LPC213X_ADC
- ARM单片机LPC213X模数转换器的实现模数(A/D)转换-ARM Single-chip implementation of LPC213X ADC analog-to-digital (A/D) conversion
AT8frequencycounting
- 利用AT89S51单片机的T0、T1的定时计数器功能，来完成对输入的信号进行 频率计数，计数的频率结果通过8位动态数码管显示出来。要求能够对0－250KHZ 的信号频率进行准确计数，计数误差不超过±hz -AT89S51 MCU using T0, T1 Counter timing to achieve the input signal frequency counting, counting the frequency of 8 resulted in the adoptio
AT45DB321C_read_write
- AT45DB321C的读写程序，测试可用，读写很方便，速度很快-AT45DB321C READ AND WRITE S PROGRAM,convenience & fast
PICcode
- PIC单片机的串口测试程序，编译环境是HCPIC18-LPC2103 serial procedures, the development environment is KeilC
I
- 51单片机通过无线收发芯片nrf2401接收下位机发送的信号，并通过串口发送至上位机。-51 single-chip wireless transceiver chip nrf2401 receive the next bit machine to send the signal through the serial port to send first bit machine.
s3c2410_ts_26
- 嵌入式linux基本内核模块，2410触摸屏框架程序，内核模块的基本框架-Embedded linux kernel module 2410 touch screen framework program, the basic framework of the kernel module
Statusbar_use
- Statusbar 的用法。Statusbar是标准控件，在其panels中可以选择增加panel和减少panel。-Statusbar usage. Statusbar standard controls, In its panels with the option to increase panel and reduce the panel.
stm8s_i2c
- stm8 i2c 总线驱动程序 包含主模式和从模式-tm8 i2c bus driver contains the master and slave modes