资源列表
pwm
- 采用VHDL编写的步进电机控制程序。运行200步后停止-Prepared using VHDL stepper motor control program. After running 200 steps to stop
ocm5x10b-Touch-Screen
- ocmj5x10b 触摸屏源程序 C语言-ocmj5x10b touch screen source code in C
Notification
- notification on dsk 6713 , useful information
2543analog
- 最实用的模拟量控制程序！但在实际应用中注意地址定义。-the most practical analog control procedures! However, in practical application to address the definition.
programmeofdianji
- 步进电机的源代码，12V，步进角7.5度，一周48次，比较实用-stepper motor source code, 12V, step angle of 7.5 degrees, 48 times a week, more practical
fdsbj
- 浮点数代数值比较（不影响待比较操作数） 入口条件：待比较操作数分别在[R0]和[R1]中。 出口信息：若CY=1，则[R0] < [R1]，若CY=0且A=0则 [R0] = [R1]，否则[R0] > [R1]。 影响资源：A、B、PSW 堆栈需求： ２字节
lcd_12864
- 128*64点阵LCD的单片机驱动代码，提供很好的参靠
LucyRichardsonAlgorithm
- The Lucy-Richardson algorithm can be used effectively when the point-spread function PSF (blurring operator) is known, but little or no information is available for the noise. The blurred and noisy image is restored by the iterative, accelerated, dam
T6963
- 240x128液晶模块的控制器T6963C被广泛应用，这是T6963C的程序举例。-240x128 LCD module is widely used controller T6963C, T6963C program is an example.
jiajuctrl
- 基于51单片机开发的一个智能家居控制系统的原代码，可实现多项控制功能。-51 single-chip based smart home developed a source code control system, can achieve a number of control functions.
HMC085_OK
- 单片机STC90C516RD，读取BMP085程序，读出气压和温度，并通过串口发送显示-SCM STC90C516RD, read BMP085 procedures, pressure and temperature read out and displayed through the serial port
hanshuqiupingjun
- c语言训练程序 用函数求两个数字的平均值-c language training program averaging two numbers with the function