资源列表
mul2
- 可实现输入的2个一位十进制数的乘法运算。要求：输入提供十个数字键，先转化为8421码，再运算，输入的数据和输出结果都要以七段显示译码器显示出来（仿真波形）。输入模块、运算模块、数据转换模块要求用不同的模块分别实现。-Can be one of the input of two decimal multiplication. Requirements: Enter the ten numeric keys provided, the first transformed into 8,421 yar
JMUX3TO1_vhdl
- This source are usefull function in VHDL for Transfer MCU Data betwine FPGA 3 port 8bit s wide Mux -This source are usefull function in VHDL for Transfer MCU Data betwine FPGA 3 port 8bit s wide Mux
xiaodou
- 主要用于4x4键盘输入消抖，消抖作为键盘操作的主要考虑因素，因此在Verilog消抖具有重要的作用。-Used 4x4 keyboard debounce, debounced keyboard operation as a major consideration, so shaking in Verilog consumer has an important role.
multiply
- 四位加法器的VHDL代码，实现四位加法器FPGA实现。-Four adder VHDL code to achieve the four adder FPGA.
CRC-8
- VHDL code for CRC-8 computing using 32 bit input (parallel)
uart
- PC机上开串口调试助手，发送一个字符到开发板（中间通过串口线相连） FPGA收到字符后，回发给PC机上，在串口助手上显示 -Open the PC serial debugging assistant, to send a character to the development board (middle connected by a serial line) After the FPGA received character is sent back to the PC, is
mpc8379
- bootloader source-bootloader source
arm2103GPIO
- arm pcl2103，增强型gpio的使用，点亮小灯。-arm pcl2103, enhanced the use of gpio, lit a small lamp.
LCD_MOUDLE_800X480
- 通宝4.3寸800*480RGB屏初始化代码-top 4.3 800*480 Intialization
gpio_test.c.tar
- 针对OMAP3530处理器，用来测试GPIO的模块程序。这个程序可以申请gpio，为gpio设置中断处理函数等功能。-For the OMAP3530 processor, the program is used to test the GPIO. This procedure can apply gpio, gpio settings for the interrupt handler functions.
18726
- mini stream mp3播放器的poc。-mini stream mp3 player of poc
datatochar
- 在液晶显示中常用的数字转字符程序，十分好用。-it s a program for number convert to char.it s very useful.