资源列表
modem
- 一种MNODEM的控制程序.采用状态机的机制实现.
ctrller
- 本代码是控制SDRAM的VHDL代码，几经优化现已趋近完美，里面主要用状态机实现，现封装为entity，便于调用模块-This code is to control the SDRAM of the VHDL code, optimization has been several times closer to perfection, which is mainly used to achieve a state machine is encapsulated entity, easy to c
000000
- 这是不错的关于万年历的额程序与仿真图，这是不错的关于万年历的额程序与仿真图 这是不错的关于万年历的额程序与仿真图-this is a good chengxu
61i_dp_distram_v6_0_vhdl
- DISTRAM IN VHDL+ ISE Xilinx
f-led
- 通过单片机IO口模拟时序，从而实现频率可调的led灯显示。-Timing simulation through the microcontroller IO port, in order to achieve a frequency adjustable led light display.
src3
- implements distance vector routing algorithm given in j f kurose book.
task-6
- This program is written for Microchip pic 18F452 microcontroller . It shows how to configure a timer and use its overflow feature for interrupt generation .
remote_can_t
- CAN如何接收远程数据帧，并且发送数据帧。-CAN data frame to a remote receiver, and sends the data frame.
xunheixian
- 循迹小车测试程序： 1.采用定时器模拟PWM控制电机信号 2.循迹平稳 3.三个红外对射传感器 互联设计淘宝店 http://inter-design.taobao.com/ -Car tracking test procedure: The 1uses the timer motor control PWM signal simulation 2tracking smooth 3three infrared sensor
CAN
- nxp lpc1768的can总线驱动，从lpc1700移植过来，希望对大家有用-lpc1768 can bus of drivers from lpc1768 transplant hope to learn 1768 to help a friend
arm--linux-key
- 基于ARMs3c44b0的键盘输入输出i/o的在 led上显示出来的程序--Show the output based from ARMs3c44b0 keyboard on led.
DUT7000V1.03
- DUT7000的地址规划,dui PLC编程时使用,-DUT7000 address planning, dui use of PLC programming,