资源列表
FIFOverilog
- 异步FIFO实现数据先入先出的存储方式基于verilog HDL语言-Asynchronous FIFO first-in, first-out data storage based on Verilog HDL language
new_rs_erasures
- ECC算法C代码，用于flash控制器等相关的一些纠错功能。-ECC algorith C code: include read-solomn and BCH code, especially for flash controller.
jianpan
- 本人验证绝对好用，自己编译，不足地方请大家改正实用的44键盘-keyboard
LM3SLib_UART_RxTx
- AVR下，lm3sxxx的UART简单程序 -AVR under, lm3sxxx the UART simple procedure
dm9000_driver.tar
- dm9000的设备驱动程序，用于S3c2440开发板的网卡驱动程序，例如友善之臂mini2440开发板。-Dm9000 of device drivers, used to S3c2440 development board the driver for the network card, such as the arms of the friendly mini2440 development board.
buzzer
- 单片机控制蜂鸣器唱歌程序，在硬件平台上编译运行通过-buzzer sing
frame_syn
- 通信系统中数据的传输以帧为单位，在FPGA中帧头检测是通信系统中的一部分，该程序实现了FPGA中帧头的检测。-Transmission of data in a communication system in units of frames, the frame header is detected in the FPGA part of the communication system, the realization of the frame header is detected in th
9999-ADD-Example
- 这是一个9999四位数的数码管累加实验，这个可为单片机初学者提供学习的借鉴-This is a 9999 four-digit digital accumulation experiments, this study can provide a reference for beginners SCM
AutoBaud
- 通用自动检测波特率程序，也可用于基本UART通讯。-Automatic baud rate detection process
nand_test
- ADI DSP硬盘操作程序。硬件为NAND FLASh-ADI DSP drives operating procedures. Hardware for the NAND FLASh
6digitfrequencycounter
- 利用AT89S51单片机的T0、T1的定时计数器功能，来完成对输入的信号进行频率计数，计数的频率结果通过8位动态数码管显示出来。要求能够对0－250KHZ的信号频率进行准确计数，计数误差不超过±1HZ。-AT89S51 MCU using T0, T1 of the timer counter functions, to complete the input signal frequency count, counting the frequency of results by 8-bit dy
ad7193
- ad7193 resource information very useful guide