资源列表
蜂鸣器音乐程序
- 在单片机上用c语言程序控制蜂鸣器播放音乐(Using a C language program to control the music of a buzzer on a single chip microcomputer)
com_232
- 实现232的收发(RS232 receive and send)
fangshier
- 编写程序，要求使用T0，采用方式2定时，在P1.0输出周期为400μs，占空比为10:1的矩形脉冲。(The program requires the use of T0, 2 timing in mode, 400 s in the output period of P1.0, and a rectangular pulse with a space ratio of 10:1.)
juchibo
- 试编程应用DAC0832输出锯齿波如图所示，锯齿波的频率为1000HZ（即周期为1ms），系统晶振为12MHZ。(假设DAC0832的芯片地址为A000H)(As shown in the DAC0832 output sawtooth wave, the frequency of the sawtooth wave is 1000HZ (that is, the period is 1ms), and the system crystal oscillator is 12MHZ. (assum
MPU6500
- STM32F427的六轴AHRS代码，。。。。。。。(STM32F427's six axis AHRS code.)
tcpxin8
- 嵌入式编程，使用modbusTcp协议完成网络传输(Embedded programming, the use of modbusTcp protocol to complete the network transmission)
备份步进控制工程2014.4.12
- PLC，ATIA vba二次开发-- 距离检测的vba实现, (CATIA_V5_Distance CATIA_V5_Distance.bas)(xinjie PLC TIA_V5_Distance CATIA_V5_Distance.bas))
USMART V2.1
- 串口调试组件，可以在串口调试工具下，调试函数，配置参数(Serial debugging components can debug functions and configure parameters under serial debug tools)
usb_dev_mouse
- C2000 F28069 USB-MOUSE example
FX1S-VB
- VB Test for Mitsu PLC
软件延时
- NEC协议的红外遥控器编码解码程序，大家收集到的通常是采用定时器中断的方式，我这个代码是采用软件延时的方法实现的，能省掉单片机的一个定时器中断源，一直运用于项目上。(NEC protocol's infrared remote control coding and decoding program. We usually use the way of timer interruption. My code is implemented by software delay. It can save
ST7565
- stm32 with controller st7565