资源列表
STM32CANbus
- STM32 Cortex平台CAN总线例程，非常有利于于新手上手CAN总线。-STM32 Cortex platform CAN bus routines, very beneficial to the novice get started CAN bus.
interrupt
- 没撒功能，单片机初学者可以用的。 呵呵。-Did not spread, microcontrollers for beginners can be used.
1LED
- Simple code used for toggle leds using Zolertia s Z1 mote
f
- 为了解决传统的维特比译码器结构复杂、译码速度慢、消耗资源大的问题，提出一种新型的适用于FPGA特点，路径存储与译码输出并行工作，同步存储路径矢量和状态矢量的译码器设计方案。该设计方案通过仿真验证，译码结果正确，得到编码前的原始码元，速度显著提高，译码器复杂程度明显降低,性能优良。-The convolution code
0
- 用VHDL语言设计一个校验器，用for loop实现8位数据的偶校验，-With a for loop to achieve 8-bit data parity
LPLD_GPIO_DMA
- Kinetis_K60底层驱动开发包GPIO_DMA部分开发，有助于此开发板的底层开发-Kinetis_K60 underlying driver development kit GPIO_DMA part of the development, contribute to the bottom of this development board development
1602
- 采用单片机+1602液晶模块进行控制简单显示。-the scm+1602lcm display
Key
- 此段代码为msp430的按键模块，中断模式，软件消抖，适合于430初学者，欢迎下载-The This code msp430 the key module, interrupt mode, software debounce suitable for 430 beginners, are welcome to download
DDS(AD9851)
- 采用MSP430F149单片机用串行方式控制AD9851产生任意频率的正弦波。-MSP430F149 microcontroller using the serial mode control AD9851 generate any frequency sine wave.
sdq
- 用loop51实现的可调式脉冲发生及检测器，可以手动输入所发生脉冲的频率和占空比，实时检测及动态显示-loop51 achieved with adjustable pulse and the detector, which can occur manually input pulse frequency and duty cycle, real-time detection and dynamic display
1602lcd
- 液晶1602与单片机 显示程序 简明-1602 Single-chip LCD display with simple procedures
sd_card
- 基于TI ccs5.3开发环境关于sd_card的源程序，cortex-M3内核，C语言编程。代码中包含如何对sd卡读取与写入的过程。-TI ccs5.3 development environment based on sd_card source, cortex-M3 core, C language programming.