资源列表
430usb
- MSP430与PHILIPS的USB设备芯片，实现接程序驱动程序-PHILIPS USB device with the MSP430 chip, to achieve access program driver
MMC_lib
- MMC library for MSP430
fangbo
- 基于C51单片机的方波发生器，可以通过中断按键调节占空比。-Adjusting the duty cycle square wave generator based on the C51 microcontroller can interrupt key.
vmuart
- atmega16用普通IO模拟uart串口协议，中断接收，使用时模拟的rxd引脚和外部中断相连-vmuart base on atmega16
Quartus_II_9.0_SP1_pojieqi
- Quartus_II_9.0_SP1破解器-See the file name
vsm-ex
- 单片机模拟,简单的C51走马灯，增加对单片机编程的了解。-single chip machine model
tms320f2407a_gpio
- tms320f2407a GPIO编程-tms320f2407a GPIO Programming
SN74HC164PC
- 这一个用keilC51编写的SN74HC164的代码，里面有注释，很容易看懂。-This is a written SN74HC164 with keilC51 code, there are notes, it is easy to understand.
DSPchufa
- 在dsp上的除法实现，#include<c8051f320.h> #include<stdlib.h> #include<stdio.h> #include<math.h> -In the division on DSP realize,# include < c8051f320. H > # include < stdlib. H > # include < stdio. H > #
45
- 51单片机开发、使用定时器产生多路频率 请在KEIL中调试-51 MCU development, use timers to generate multiple frequencies in the KEIL debug
DS1302
- 时钟芯片的利用。通过52单片机的控制，从而实现时钟的准确控制。程序很好移植，改变IO口就可以运行了-Clock chip utilization. Through control of the microcontroller 52, in order to achieve accurate control of the clock. Good transplant program, changing IO ports can run
S3C2410_I2C_Controller
- liunx下S3C2410 I2C主机驱动 S3C2410 I2C Controller-liunx under S3C2410 I2C host driver S3C2410 I2C Controller