资源列表
ram_control_17_xian
- 基于VHDL的ram控制器，8根输入，8根输出，1根读写控制线。实现ram的读写控制-The ram controller based on VHDL, 8 input and 8 output, a read-write control lines. Ram read and write control
dpj1
- 八路抢答器设计,有相应的运行程序和运行结果,以及完整的实验报告-Answer eight-way design, the operation of the corresponding procedures and operating results, as well as the integrity of the experimental report
digitalclock
- proteus 数字时钟 ds1302-ds1302 digital clock proteus
dianyuan
- 两路输出：1：0-30V/4A 2: 5V/1.5A（固定输出） 电压分辨率0.458mV，电流分辨率0.076mA 电压步进0.0073V，实际用的是0.1V步进调节 基于89c52-Two output :1:0-30V/4A 2: 5V/1.5A (fixed output) voltage resolution 0.458mV, current resolution 0.076mA voltage stepping 0.0073V, actually using a 0.1V
yinyue
- 根据此编程方式，可简单而又方便的使用单片机实现音乐播放-According to this way of programming can be simple and convenient to use single-chip realization of music player
I2C
- LPC2XXX系列ARM7 I2C接口驱动。因为大多数该类驱动支持的是小容量的E2ROM，我改成支持24LC256等大容量E2ROM。我在ADS1.2上调试过。可以直接在ADS1.2上使用。现已应用在项目上，希望对您有帮助！-ARM7 I2C interface series LPC2XXX drive. Because most of these drives support the small-capacity E2ROM, I changed to support large-capaci
ICCard
- 向ic卡中写入数据，利用深圳明华生产的明华ic卡读卡器来实现。其ic卡采用西门子sle4442型号，在写入数据前需要进行密码校对，-Ic card to write data, using the production in Shenzhen Ming Wah Ming China ic card reader to achieve. Siemens sle4442 its ic card model, in the write data before the need for password
HM6264Driver_DS
- HM6264（8KX8Bit RAM）驱动程序-The HM6264 (8KX8Bit RAM) drivers
uCOS_II
- 此源码是UC OS 2的系统源码，可以移植到TX2440开发板上进行测试-This source is UC OS 2system source code, can be ported to TX2440 development board test
wangfan
- 此代码是电子设计大赛-自动往返小车的国一代码，大家可以参考下-This code is Electronic Design Contest- Automatic country and the car a code, we can refer to the following
AVR_C
- AVR单片机C语言程序的开发示例，详细介绍AVR单片机如何用C语言来开发
Glcd-Farsi
- GLCD library.C program for avr.