资源列表
lpc2132.rar
- LPC2132开发板，protel99格式，包括原理图和PCB图,LPC2132 protel99 SCH PCB
CAN
- 此程序位TI公司DSP 2407 CAN总线协议通讯，通过此程序可以了解DSP CAN 总线通信的基本知识-This program bit TI, DSP 2407 CAN bus protocol communication, and by this program can understand the DSP CAN bus communication of the basic knowledge
huichengchuanganqiP51
- 51+灰尘传感器的运用+C语言的运用里面带有仿灰尘传感器用AD采集-+ 51 + dust sensors use the C language, which with the use of imitation collect dust sensor AD
x9c103驱动程序
- 基于51单片机实现键控阻值，按一次可以步进1k欧姆，阻值有些许误差。
KEY
- 本实验是DSP中键盘断响应，读键值并将键值显示到LED灯上。本实验采用中断键盘和I/O键盘，当有键按下时给DSP一个中断信号，DSP通过此I/O读键值，在读取键值后由LED亮灭显示出来。-DSP in this experiment is off to respond to the keyboard, reading keys and display to the LED lights on the key. The present study, interruption of the keyb
Verilog
- 基于Verilog HDL的通信系统设计一书的源代码，大家可以下载，参考一下-Verilog HDL-based communication system design of the book source code, you can download, refer to
ndis3ce
- 在CE下实现ndis的源代码-under the CE source code NDIS
LEDtest
- 440BX开发板 LED显示测试 试验程序-440BX Development Board LED tests procedures
PHILIPS51LPC
- 飞利浦51LPC系列单片机对交流电机控制的电路原理图和源程序-51LPC Philips Microcontroller series of AC motor control circuit schematic and source
6.4_usb_test
- S3C2410中usb驱动的测试程序。程序的运行环境为EVC。-S3C2410 usb driver in the test program. The running environment for EVC.
RA8835_320x240
- 液晶模块_RA8835 C语言程序,已经经过硬件测试-ra8835 READ AND WRITE
lock
- 用4×4组成0－9数字键及确认键。 用8位数码管组成显示电路提示信息，当输入密码时，只显示“8.”，当密码位数输入完毕按下确认键时，对输入的密码与设定的密码进行比较，若密码正确，则门开，此处用LED发光二极管亮一秒钟做为提示，同时发出“叮咚”声；若密码不正确，禁止按键输入3秒，同时发出“嘀、嘀”报警声；若在3秒之内仍有按键按下，则禁止按键输入3秒被重新禁止。 -4 × 4 with the composition of the number keys 0-9 and confirm k