资源列表
dianrong
- 由单片机计数思路设计的简易电容计测试程序（适用于总线式思路设计的单片机硬件电路）-Thinking Design from the SCM count simple capacitance meter testing procedures (for bus-thinking design of the microcontroller hardware)
file_transfer.tar
- linux系统下实现文件传输，主要实现为socket的tcp链接，是现在不同电脑上的文件传输。-linux system to achieve file transfer, the main achievement is the tcp socket link is now on a different computer file transfer.
24c16
- STM8L152C6T6 基于寄存器配置的控制24C16的读和写。IAR-STM8L152C6T6 24C16
NfcrdlibEx7_EMVCo_Polling
- - NfcrdlibEx7_EMVCo_Polling can be run with PNEV512B, CLEV663B, PN5180 and PN7462AU. (See Section-10 for supported versions) - This example performs the EMVCo Polling loop. - Upon activation of the detected card, the example shall send a Sel
12864_Serial
- 基于C8051F020的12864串行显示，串行接口只要四根线即可，具有基本的显示功能-Based on the 12864 C8051F020, serial interface as a serial line, with four basic display!!!!!!!!!!
pll_ics
- 使用lpc89c932实现与TRF372017的通讯并配置 -use lpc89c932 to communicate with TRF372017
Spi
- 基于avr mega16的spi（串行外设接口）通讯例程-Spi (Serial Peripheral Interface) communication routines based on avr mega16
jiaotongdeng
- 可以实现东西红灯南北绿灯——东西红灯亮南北转黄灯——东西绿灯南北红灯——东西转黄灯南北红灯亮的转换（初始状态为四方红灯）。-North and South can achieve something red light green light- north and south turn things red light yellow- green north-south red things- things that turn yellow north-south red light conve
stm32_gpio
- stm32f103 普通IO口操作例程
The-temperature-alarm-system-
- 由键盘设定上限，下限温度；DS18B20测量温度；并在1602液晶上显示设定温度，测量温度；若测量温度不在设定森度范围里，则蜂鸣器响，进行报警。-From the keyboard to set an upper limit, lower limit temperature DS18B20 measures temperature and in the 1602 LCD display set temperature, temperature measurement if the tem
5618
- 51单片机程序，测试芯片AT89S52,TLV5618,数模转换器，转换范围0~5V，可用来生成标准3.3V电压。-51 SCM procedures, test chip AT89S52, TLV5618, DAC, conversion range 0 ~ 5V, can be used to generate a standard 3.3V voltage.
eup
- It is the HDL and MATLAB code for image processing in Modelsim.