资源列表
54DSPkuozhanxunzhi
- 这是用C语言编写的TMS320C54X的扩展寻址代码程序-This is the C language prepared by the expansion of addressable TMS320C54X code procedures
auto-wash
- 本机使用8051单片机,实现自动洗衣机,可水位自动进给水.-hfd
stopwatch
- 用动态扫描方法和定时器1在数码管的前三位显示出秒表，精确到1 秒，即后两位显示1 秒，一直循环下去-Using dynamic scanning method and Timer 1 in the top three digital tube display stopwatch, accurate to 1 of the second, which shows one percent after two seconds, and loop forever
driver-for-arm
- arm9开发板所用到得各个驱动程序，LCD，LED，key等驱动程序-arm9 development board used have various drivers, LCD, LED, key drivers
direct
- 用c语言实现数控系统直线插补，代码简洁明了 -NC system linear interpolation, concise code c language
102-DS1302
- DS1302应用 ，时钟原理准确，用于ds1302的初步测试-DS1302 Application, accurate clock principle for the initial test ds1302
ds1302a
- 读写实时时钟芯片DS1302，通过串口返回给电脑-Read and write real-time clock chip DS1302, returned to the computer through the serial port
F040_uart
- 单片机串口驱动程序，针对新华龙040开发板进行的串口开发。-Microcontroller serial port driver for the new development board for Hualong 040 serial port development.
setmotor
- 步进电机以及直流电机的使用程序 设置正反转-Stepper motor and DC motor reversing the use of program settings
51device
- 51基本外设的初始化跟应用函数都有了，有ps2，iic，uart，看门狗，ds1302，ds18b20等，入门级别的东西很全了。-51 basic peripheral functions are initialized with the application, and there ps2, iic, uart, watchdog, ds1302, ds18b20 and so on, entry-level stuff was all the.
clock_project
- 用单片机实现的电子钟程序，实现数码管显示和闹钟报警功能。-Electronic clock with the MCU program to achieve digital control display and alarm clock alarm.
xuanguayundongkongzhixitong
- 本系统以单片机为核心，通过步进电机实现运动轨迹控制。系统由电机驱动器、黑白线检测、人机交互以及单片机控制器四个部分组成。系统中使用了两个单片机，一片为W78E58B，通过精确算法实现对步进电机的直接控制；另一片为AT89C51，用于语音播放，两单片机之间通过485通信建立联系。此外，看门狗DS1232的应用，提高了单片机控制系统的抗干扰能力。