资源列表
spi
- 一整套与外设（单片机采样的数据）数据交换，包括系统时钟初始化，波特率设置，时钟中断，三相电压的锁相，fft等程序编写，以通过调试，在产品研发中实用。-Set the peripherals (monolithic sampling data) data exchange, including initialization of the system clock, the baud rate, the clock interrupt, three-phase voltage phase-locke
DAC
- LPC1756 M3内核参考程序(数模转换程序）-avr mega16+ DAC
Serial-port-to-send-data
- 在单片机上串口发送数据到2片8×8点阵屏滚动显示，用proteus仿真-In the microcontroller serial port to send data to the two 8 × 8 dot matrix screen scroll, with proteus simulation
bujindianji1
- 凌阳单片机程序，可以控制四线制步进电机的转速。-Sunplus SCM process can control the speed of the four-wire stepper motor.
set-timer
- 使用软件编程实现对mso430f149内部定时器的设置。-Using the software programming of the mso430f149 internal timer settings.
Z-video-udp-receiver
- 在LINUX系统下，采用UDP协议，读取从网络传送过来的视频图片，并动态的显示在QT开发的界面上-Under LINUX system, using the UDP protocol, transferred from the network to read over the video picture, and dynamically displayed on the QT interface development
PL_FSK2
- 基于altera公司的quartus软件做的2FSK解调-The doing altera quartus software 2FSK demodulation
uart
- stm8的uart例程，不带库的，对uart进行初始化，向串口发送数据-stm8 the uart routines, without the library, on the uart to initialize, send data to the serial port
dianziqin
- 80C51单片机中利用蜂鸣器实现电子琴的源程序。包含蜂鸣器的datasheet。
UART-test-self-send-a-receive
- 单片机部分试验程序（89c51）,UART试验自收自发, -SCM part of the test program (89c51), UART test collected spontaneously,
TC3_PCPWM
- mega128定时器3的相位修正模式产生的PWM波形-mega128 timer PWM waveform generation phase correction mode 3 of
Traffic-Light-Design
- 基于51的交通灯设计，有多种模式，当一个方向多时无人、车经过时，可对另外路口放行的人性化设计-51 traffic lights based on the design, there are several modes in one direction for a long time when no one, the car passed by, on the other junction can release the human design