资源列表
stc89c52-ZJ-RS485
- 此为STC单片机控制的RS485主机通讯控制程序可以实现远距离通讯控制，并可多机控制。-This is the STC Microcontroller RS485 host communications control program can control the remote communication, and multi-machine control.
TX
- MSP430 与蓝牙模块进行通信，蓝牙模块虚拟为上位机串口，并使Msp430F2618工作在16M情况下，UART通信速率为115200。-MSP430 communicates with the Bluetooth module, Bluetooth module for the PC virtual serial port, and to work in the 16M case Msp430F2618, UART communication speed is 115200.
I2CSLAVE-TDis(check)
- C51模拟I2C从机接收数据并在数码管上显示-C51 simulation I2C and receiving data from the machine shown in the digital control
Key_p1.3
- 用msp430g2553设计的键盘中断程序-With msp430g2553 designed keyboard interrupt program
ta6932
- 天微电子TA6932，LED数码管驱动源程序。贡献出来，只为方便你我!-titan Microelectronics TA6932, LED digital tube-driven source code. Contribution, for convenience only and you and me!
TDC
- TDC测量时间间隔程序，在MSP430单片机中实现，TDC的测量精度为50PS。-Its the program of TDC for measuring time interval.It is used in msp430.
MPX4250
- MPX4250压力传感器C源程序，还有protues仿真源程序，可以参考学习-MPX4250 pressure sensor C source protues simulation source code, can refer to learning
AD
- 电子秤AD转换芯片hx711，用lcd1602显示-hx711 and lcd1602 display
program-for-Solarnumen-Comdebug
- 使用C语言编写的单片机的串口调试程序源代码-Serial debugger, source code written in C language microcontroller
GY521mpu-6050
- 三轴陀螺仪和三轴加速度的msp430程序-Msp430 program of three-axis gyroscope and triaxial accelerometer
spc3
- 1.USERSPC3.C主程序，这部分主要完成SPC3初始化、启动、发送数据和接收数据以及诊断等功能 2.INTSPC3.C中断模块，主要处理从站参数、组态数据检查和从站地址设定等功能 3.DPS2SPC3.C模块，主要功能是根据组态数据计算输入输出数据长度，辅助缓冲区分配，缓冲区初始化，设置IO数据长度，各缓冲区数据更新等 4.DPS2USER.H模块。用来定义变量和宏接口，宏接口使用户可以方便的访问SPC3的寄存器-C51 code for profibus-dp develpm
cantool
- 基于linux socket can程序，主要功能： 程序具备全部CAN功能，包括CAN标准帧/扩展帧接收与发送、CAN总线错误判断、环回等功能 适用基于LINUX SOCKET机制实现的CAN接口，可用于嵌入式LINUX的CAN测试 程序采用标准LINUX命令行参数选项形式，接受用户参数(Based on the Linux socket can program, the main functions: The program has all CAN functions, in