资源列表
HowToUseI2cDriver_Mini2440_WindowsCE6
- This document explains how to use I2C driver with the mini2440 Windows CE 6 BSP. A source code sample is joined.
001-pro
- P3.0和P3.1同时也是仿真通讯口RxD和TxD, 在通过SST89E564仿真芯片的做硬件仿真时候， 需要通过RxD（P3.0）和TxD（P3.1）作为通讯端口 所以例程中的流水灯没有用这2个口 -P3.0 and P3.1 also simulated communication port RxD and TxD, SST89E564 simulation through hardware emulation chip to do when the nee
Adopted_PWM
- MSP430 自适应PWM波控制程序，根据AD采样反馈调节PWM波输出占空比-MSP430 adaptive PWM wave control program, according to AD sampling wave PWM output duty cycle feedback regulation
DMX512-receive
- 单片机使用AT89c52或W78E52B，晶振使用24M，串行方式3,(如果要使用单片机AT89c51或AT89c2051，晶振使用16M，串行方式2)-Microcontroller using AT89c52 or W78E52B, crystal use 24M, serial 3, (if you want to use the microcontroller AT89c51 or AT89c2051, crystal use 16M, serial 2)
hdisk
- 这个软件主要是介绍Vxwork驱动编写，对于学习编写Vxwork的用户有很大的帮助，-the software is introduced Vxwork drive preparation, learning to prepare Vxwork users will be very helpful,
W5100_driver_v1_5
- Driver for the W5100 chip
elevator-up-to-the-downside
- 单片机控制双色点阵，模拟电梯上下行，是学习点阵控制的好材料-Single-chip dot matrix color control, analog elevator up and down the line
zxb
- 读表法显示正弦波，附图。但只能输出定频，需要经过改动才能输出可调的
DF-wireless
- 常见 433MHZ 的 DF无线模块程序，内含接收和发送示例，实现了在1T单片机（STC12C5A60S2）上的收发功能，用户可根据实际情况，更改接收时的电平时间范围。-The DF common 433MHZ wireless module procedures, including receiving and sending sample, realized in 1T MCU (STC12C5A60S2) on the transceiver function, the user can
LED_Driver
- 基于TQ6410的WINCE6.0下的LED驱动源码,仅供参考-TQ6410-based LED drivers under the WINCE6.0 source for reference.
newDisk_rate_test
- 可以测试硬盘速率的程序,自动给出测试结果，初学者可以好好看看。-Hard disk speed test procedure, the test results automatically given, beginners can take a look.
dnld_util_target.tar
- Donwload program for Omap3530