资源列表
keil_iodemo
- The project KEIL_IODemo shows how to use memory allocation routines (malloc) and char I/O (printf, scanf) via a serial interface with the Keil ARM toolchain. The I/O functions are adapted for the Analog Devices ADuC7000 series using the SERIAL.C
spi.rar
- GEC2440与TMS2407的SPI通信，通信模式：中断，DSP作为主机,TMS2407' s GEC2440 and SPI communication, communication modes: interrupt, DSP as a host
51_PWM
- 利用51单片机，产生两路互补的PWM波，两个按键调节两路PWM波的频率和脉宽。 程序带有很详细的注释，一看都明白。-51 MCU produce two PWM
4-LED-8X8
- 基于PIC18F4520的动态数码自动计数显示实验程序-PIC18F4520-based dynamic digital automatic counting showed that the experimental procedure
button
- c51单片机的键盘驱动，需要的可以看看，botton-C51 microcontroller keyboard driver need to look at
backlite
- wince s3c2440 背光代码,用流驱动方式实现,对wince初学者有用
i2c
- I2C的 VHDL 源代码, 已经经过逻辑验证,并实际用在芯片设计中,作为一个模块,正常工作.-I2C the VHDL source code has been verified through logic, and actually used in the chip design, as a module to work.
zhankongbi
- 检测方波信号的占空比，将信号经过与门电路，可以测量方波的相位差，并在LCD1602中显示-Detection of square wave signal, the signal through the gate circuit, phase difference measurement of square wave, and display in LCD1602
3.3V-5V
- 通过微处理器MSP430F149实现3.3V与5V之间的转换，转换芯片是SN74LVC4245ADB(APW)-MSP430F149 microprocessor achieved through conversion between 3.3V and 5V, the conversion chip is SN74LVC4245ADB (APW)
project
- 基于51单片机的红外线防盗报警器的发射部分代码。4x4按键用于输入密码，并用语音芯片可发出声音提示，lcd1602用于显示-51 microcontroller-based infrared anti-theft alarm transmitter code. 4x4 button to enter a password, and sound prompts with voice chip is used to display lcd1602
keyboard
- 本文档说明AVR单片机的Atmega 16对键盘按键控制的程序
shubiao
- 鼠标应用程序示范 LCD显示单元 背光灯控制-Mouse demonstration application backlight LCD display control unit